Page 31 / 88
Scroll up to view Page 26 - 30
31
D-Link DCS-3110 User Manual
Section ² - Configuration
Setup
Wizard
To quickly configure your network camera, click
Internet
Connection Setup Wizard
or click
Manual Internet
Connection Setup
to manually configure your network
camera.
To quickly configure your network camera’s motion
detection settings, click
Motion Detection Setup
Wizard
and skip to page 36. If you want to enter your
settings without running the wizard, click
Manual
Motion Detection Setup
and skip to page 49.
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to configure your new D-Link Camera and connect the camera
to the internet. Click
Next
to continue.
Click
Next
Page 32 / 88
3±
D-Link DCS-3110 User Manual
Section ² - Configuration
Click
Next
Click
Next
Select
PPPoE
if the camera is directly connected to the
Internet through a DSL modem and your ISP (Internet
Service Provider) requires you to use PPPoE for the
Internet connection. Click
Next
to continue and skip to
Step 2 on page 33.
Select
DHCP
if you are unsure which settings to pick.
Click
Next
to continue and skip to page 34.
Page 33 / 88
33
D-Link DCS-3110 User Manual
Section ² - Configuration
Click
Next
Click
Next
If you have selected PPPoE, enter your username and
password. Click
Next
to continue.
Select
Static IP
if your Internet Service Provider has
provided you with connection settings, or you wish to set
a static address within your home network. Click
Next
to continue.
Page 34 / 88
3²
D-Link DCS-3110 User Manual
Section ² - Configuration
Click
Next
Click
Next
Click
Next
If you have a Dynamic DNS account and would like the
camera to update your IP address automatically, enable
DDNS and enter your host information. Click
Next
to
continue.
Enter a name for your camera and click
Next
to continue.
Configure the correct time to ensure that all events will
be triggered, captured, and scheduled at the right time.
Click
Next
to continue.
Page 35 / 88
3³
D-Link DCS-3110 User Manual
Section ² - Configuration
Click
Apply
Once you have selected
Dynamic
,
PPPoE
, or
Static
,
you will see a summary of your camera’s settings. Click
Apply
to save and activate your settings.
19216811.live