±1

D-Link DCS-3110 User Manual

Section ² - Configuration

Double-click

DCS-3110

in the Installation Wizard window to launch

the camera’s web configuration utility.

Enter

admin

as the default username and leave the password blank.

Click

OK

to continue.

Note:

If you have changed your password, please enter your new

password.

Click

OK

±±

D-Link DCS-3110 User Manual

Section ² - Configuration

This section shows your camera’s live video. You can control your settings using the buttons below.

±3

D-Link DCS-3110 User Manual

Section ² - Configuration

Web-based Configuration Utility

To access the configuration utility, open a web-browser

such as Internet Explorer and enter the IP address of

your Network Camera (http://192.168.0.120)

Note:

In the example, this address is 192.168.0.120. Your address

may differ.

Type

Admin

in the user name field and leave the

password blank by default. Click

OK

to continue.

Note

:

You may refer to page 66 to change the password for your

admin account.

This section will show you how to configure your new D-Link Network Camera using the Web-based Configuration

Utility.

Click

OK

±²

D-Link DCS-3110 User Manual

Section ² - Configuration

As seen by Mozilla Firefox and Netscape users, Quick Time player is invoked to stream the live video.

Live Video

±³

D-Link DCS-3110 User Manual

Section ² - Configuration

Using RTSP Players

Quick Time Player

Real Player

VLC media player

mpegable Player

pvPlayer

1. Launch a RTSP player.

2. Choose

File

>

Open URL

.

3. Type the URL command in the text box and then click

OK

.

URL command =

rtsp://<ip address of your camera>:<rtsp port>/<access name

for stream1 or stream2>

Note:

Please refer to pages 39-44 for the settings of your RTSP port and stream files.

For example:

4. You can view the live video in your player, as shown in the figure.

Use one of the following media players that support RTSP streaming to view MPEG-4 streaming media.