³´

D-Link DCS-3110 User Manual

Section ² - Configuration

Media Name:

Snapshot:

Source:

Send pre-event

image(s) [0~7]:

Send post-event

image(s) [0~7]:

File name prefix:

Add date and time

suffix to file name:

Video clip:

Source:

Pre-event recording:

Maximum duration:

Maximum file size:

File name prefix:

System log:

Enter an unique name for media.

Select this feature to enable camera to take

snapshot.

The source of stream:

stream1

or

stream2

.

The number of pre-event images.

The number of post-event images. Refer page 57 for

more information.

The prefix name will be added on the file name.

Check it to add timing information as file name suffix.

Refer page 57 for more information.

Select this feature to enable camera to take video

clip.

The source of stream:

stream1

or

stream2

.

The interval of pre-event recording in seconds.

The maximal recording file duration in seconds. Refer page 58 for more information.

Refer page 58 for more information.

The maximal file size would be generated.

The prefix name will be added on the file name of the video clip. Refer page 58 for more

information.

Refer page 58 for more

information.

Select this feature to enable camera to display system log.

Add Media

There are three types of media,

Snapshot

,

Video Clip

and

System Log

.

³µ

D-Link DCS-3110 User Manual

Section ² - Configuration

Send post-event image (s) [0~7)

Specify to capture the number of images after a trigger is activated. A maximum of seven images can be generated.

For example:

If both the Send pre-event images and Send post-event images are set to seven, a total of 15 images are generated

after a trigger is activated.

Add date and time suffix to file name

Select this option to add date and time to the file name suffix.

1 pic.

2 pic.

3 pic.

4 pic.

5 pic.

6 pic.

7 pic.

8 pic.

9 pic.

The moment the

trigger is activated.

SNAPSHOTS

20080104_100341

Date and time suffix

The format is: YYYYMMDD_HHMMSS

File name prefix

³¶

D-Link DCS-3110 User Manual

Section ² - Configuration

Maximum duration

Specify the maximal recording duration in seconds. You can set up to ten seconds.

For example:

If the Pre-event recording is set to five seconds and the Maximum duration is set to ten seconds, the Network Camera

continues to record for another four seconds after a trigger is activated.

File name prefix

Enter the text that will be added at the beginning of the file name.

1 sec.

2 sec.

3 sec.

4 sec.

5 sec.

6 sec.

7 sec.

8 sec.

9 sec.

10 sec.

The moment the

trigger is activated.

VIDEOS

20080104_100341

Date and time suffix

The format is: YYYYMMDD_HHMMSS

File name prefix

³·

D-Link DCS-3110 User Manual

Section ² - Configuration

Event name:

Enable this

event:

Priority:

Delay:

Trigger:

Video motion

detection:

Periodic:

Digital input:

System boot:

Time:

Trigger D/O:

CF Card:

Enter a name for the event.

Select to activate this event.

Set the priority for this event. The event with higher priority

will be executed first.

Select the delay time before checking next event. It is

being used for both events of motion detection and digital

input trigger.

The input type that triggers the event.

Motion is detected during live video monitoring. Select the

windows that need to be monitored.

The event is triggered in specified intervals. The unit of

trigger interval is minute.

External trigger input to the camera.

Triggers an event when the system boots up.

Select

Always

or enter the time interval.

Select to trigger digital output for specific number of

seconds when an event occurs.

To record media to the CF card when an event is

triggered.

Add Event

Create and schedule up to 3 events with their own settings here.

´0

D-Link DCS-3110 User Manual

Section ² - Configuration

Recording entry

name:

Enable this

recording:

Priority:

Source:

Recording

schedule:

Recording

settings:

Destination:

Total cycling

recording size:

Size of each file

for recording:

File Name Prefix:

The unique name of the entry.

Select this to enable the recording function.

Set the priority for this entry. The entry with a higher

priority value will be executed first.

The source of stream.

Scheduling the recording entry.

Configuring the setting for the recording.

Select the folder where will store the recording

file.

Please input a HDD volume between 1MB and

200GB for recording space. The recording data will

replace the oldest one when total recording size

exceeds this value. For example, if each recording

file is 6MB, and the total cycling recording size is 600MB, then the camera will record 100 files to the specified location (folder)

and then will delete the oldest file and create new file for cycling recording.

Please note that if the HDD empty space is not enough, the recording will stop. Before you setup this option please make

sure your HDD has enough space and it is better to not save other files in the same folder as recording files.

File size for each recording file. You may input the value in the range of 200-6000.

The prefix name will be added on the file name of the recording file(s).

Add Recording

Here you can configure and schedule the recording settings.