1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DCS-3110
    5. /
  5. 16
Page 76 / 88 Scroll up to view Page 71 - 75
µ´
D-Link DCS-3110 User Manual
Section ² - D-ViewCam Installation
Welcome to the Add Camera Wizard. Use this wizard to add your cameras to the D-ViewCam system.
Note:
Use the left or right arrow to navigate the wizard.
Click
to continue.
Click
Page 77 / 88
µµ
D-Link DCS-3110 User Manual
Section ² - D-ViewCam Installation
Select which method to add your camera(s). You can select
Auto
Discovery
to automatically search for your camera(s), or select
Add
Manually
to add your camera(s) using the camera’s IP address. Click
Next
to continue.
If you select
Auto Discovery
, the system will search all cameras that are
located on the same LAN with same subnet. The system will place all the
cameras at the default map called
My Map
. Click
Next
to continue.
If you choose
Add Manually
, enter the IP address or domain name, http
port, model name, camera ID and password.
Click the “
?
” button to auto detect the camera’s model name, then the
model name will appear in the
Model Name
box.
Click
Next
to continue.
Page 78 / 88
µ¶
D-Link DCS-3110 User Manual
Section ² - D-ViewCam Installation
D-ViewCam shows the detected network camera(s) information. You can select the recording mode for each camera.
• 24/7 Continuous Recording
: Continuously records 24 hours a day, 7 days a week.
Continuously records 24 hours a day, 7 days a week.
• 24/7 Motion Detection Recording
: Continuously monitors, but only records when motion is detected.
Continuously monitors, but only records when motion is detected.
• Office Hours Only
: Continuously monitors during office hours (8:00AM to 6:00PM), and only records when
Continuously monitors during office hours (8:00AM to 6:00PM), and only records when
motion is detected.
• Non-Office Hours Only
: Continuously monitors during non-office hours (6:00PM to 8:00AM), and only records when
Continuously monitors during non-office hours (6:00PM to 8:00AM), and only records when
motion is detected.
Note:
Excluding 24/7 Continuous Recording, all other schedule recording modes can only record when motion is detected. Please refer
to the user manual for more information.
Click
Next
to continue.
Page 79 / 88
µ·
D-Link DCS-3110 User Manual
Section ² - D-ViewCam Installation
Select
Yes
to add other cameras, or select
No
if you have no additional
cameras to add. Click
Next
to continue.
The
Add Camera wizard
is now complete. Click
Close
to access the D-ViewCam’s main screen.
Your D-ViewCam Installation is Complete!
Note:
Please refer to the D-ViewCam user manual for information
about using D-ViewCam.
Page 80 / 88
¶0
D-Link DCS-3110 User Manual
Section ³ - Frequently Asked Questions
Frequently Asked Questions
Megapixel PoE Network Camera Features
1. What is a Megapixel PoE Network Camera?
The Megapixel PoE Network Camera is a stand-alone system connecting directly to an Ethernet or Fast Ethernet network. The Megapixel
PoE Network Camera differs from a conventional PC Camera because it has an integrated system with built-in CPU and web-based
solutions, providing a low cost solution that can transmit high quality video images for monitoring. The Megapixel PoE Network Camera
can be remotely managed, accessed and controlled using a web browser from any computer over an Intranet or Internet.
2. What is the maximum number of users that can access DCS-3110 simultaneously?
The maximum number of users that can log onto the Megapixel PoE Network Camera at the same time is 10. Please keep in mind the
overall performance of the transmission speed will be reduced if many users have logged on to the camera simultaneously.
There is no limit on the number of users when a multicast-enabled router is being used. The multicast protocol helps reduce the network
bandwidth consumption.
Note that the Network Camera must be configured to enable multicast streaming. For more information, see RTSP Streaming on page
41.
3. What algorithm is used to compress the digital image?
The Megapixel PoE Network Camera utilizes MPEG-4 simple profile or MJPEG Mode image compression technology providing high quality
Megapixel PoE Network Camera utilizes MPEG-4 simple profile or MJPEG Mode image compression technology providing high quality
PoE Network Camera utilizes MPEG-4 simple profile or MJPEG Mode image compression technology providing high quality
images. MJPEG is a standard for image compression and it can be applied to various web browsers and application software without
installing any extra software
4. Can I capture still images from the Megapixel PoE Network Camera?
Megapixel PoE Network Camera?
PoE Network Camera?
Yes you can capture still images using the snapshot function.
This chapter provides solutions to problems that may occur during the installation and operation of the DCS-3110.
Read the following descriptions if you are having any problems.

Rate

3.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top