Page 86 / 88 Scroll up to view Page 81 - 85
¶´
D-Link DCS-3110 User Manual
Appendix B - External I/O Port
External I/O Port
DI/DO Diagram
Pin 1~4 are used to connect with digital input and digital output devices.
Refer to the following illustration for connection method.
The
DCS-3110
provides a general I/O terminal block with one digital
input and one relay switch for device control. The relay switch of DO+ and
The relay switch of DO+ and
DO- can be used to turn on or off the external device. DI+ and DI- can be
DI+ and DI- can be
connected to an external sensor and the state of voltage will be monitored
from the initial state ‘LOW’.
External I/O Port
The digital input is used for connecting external alarm devices and once
triggered images will be taken and e-mailed.
The I/O connector provides the physical
interface for digital output (DO) and digital
input (DI) that is used for connecting a
diversity of external alarm devices to the
Network Camera such as IR-Sensors and
alarm relays.
12V
+12V
Digital output
Power+12V
Digital input
Ground
DO+
DO-
DI+
DI-
Page 87 / 88
¶µ
D-Link DCS-3110 User Manual
Appendix C - Technical Specifications
Technical Specifications
NETWORK PROTOCOL SUPPORT
• IPv4, TCP/IP, RTSP/ RTP/ RTCP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP,
DDNS,PPPoE, IGMP, Samba client, IP Filtering, 3GPP
BUILT-IN NETWORK INTERFACES
• 10/100BASE-TX Ethernet port, RJ45
VIDEO ALGORITHM SUPPORT
• JPEG for still image
• Compression: MJPEG & MPEG-4
• Streaming: Simultaneous dual-streaming
• MPEG-4 streaming over UDP, TCP, or HTTP
• MPEG-4 multicast streaming
• MJPEG streaming over HTTP
• Supports 3GPP mobile surveillance
• Camera live viewing for up to 10 clients
VIDEO RESOLUTION
• MJPEG video with resolution up to 1280x1024 (1.3 Megapixel)
• MPEG-4 video with resolution up to 640x480 (VGA)
• Up to 30fps at 176 x 144
• Up to 30fps at 320 x 240
• Up to 30fps at 640 x 480
• Up to 8 frames at 1280x1024
VIDEO FEATURES
• Adjustable image size, quality, and bit rate
• Time stamp and text overlays
• 3 configurable motion detection windows
• Flip & mirror
• Configurable brightness
• AGC, AWB, AES
VIDEO BIT RATE
• 20K to 4M
SENSOR & LENS SPECIFICATIONS
• 1/4” 1.3mega-pixel progressive color CMOS sensor
• 6 mm megapixel lens, F1.6
• Removable IR-cut filter: Auto/Schedule/Manual
• Minimum illumination: 1.5 Lux, F2.0
AUDIO
• Compression and bit rate:
GSM-AMR speech compression, bit rate: 4.75 kbps ~12.2 kbps
MPEG-4 AAC audio encoding, bit rate: 16 kbps ~128 kbps
• Interface: Built-in microphone, external microphone input, external speaker output
• Supports two-way audio by SIP protocol
• Supports hardware and software audio mute
EVENT MANAGEMENT
• Motion detection weekly schedule
• Event notification and upload snapshots/video clips via using HTTP, SMTP, or FTP
• Multiple HTTP, SMTP, or FTP server setup
• Multiple event notification setups for flexible application
• Multiple recording methods for easier backup
SECURITY
• Administrator and user group protected
• Password authentication
• HTTP and RTSP digest encryption
SURVEILLANCE SOFTWARE FUNCTIONS
• Remote management/control of up to 32 cameras
• Viewing of up to 32 cameras on one screen
• Supports all management functions provided in web interface
• Scheduled motion triggered, or manual recording options
REMOTE MANAGEMENT
• Configuration accessible via web browser
• Take snapshots/video clips and save to CF card, local hard drive or NAS via web
browser
Page 88 / 88
¶¶
D-Link DCS-3110 User Manual
Appendix C - Technical Specifications
SYSTEM REQUIREMENTS
• Operating System: Microsoft Windows
®
XP/Vista
• Browser: Internet Explorer, Firefox, Netscape, Mozilla, Opera browser
SUPPORTED PDA, MOBILE PHONES & SOFTWARE
Handsets with 3GPP player
• Packet Video Player 3.0
• QuickTime 6.5
• Real Player 10.5
PHYSICAL & ENVIRONMENTAL
LAN
• IEEE 802.3 compliance
• IEEE 802.3u compliance
• Support Full-Duplex operations
• 802.3x Flow Control support for Full-Duplex mode
• Supported IEEE 802.3af standard (PoE)
FRONT-END STORAGE
• CF card slot for local recording of MP4 file
EXTERNAL DEVICE INTERFACE
• One D/I and one D/O for external sensor and alarm
• RS485 interface for external scanner
• DC12V output for external accessory
DIAGNOSTIC LED
• 2 color LED
POWER INPUT
• 100-240Vac, 50/60Hz, 12V, 1.25Adc.
POWER CONSUMPTION
• MAX 4 W
DIMENSIONS
• 80 (W) X 143.8 (D) X 62 (H) (MM)
WEIGHT
• 521 gm
OPERATION TEMPERATURE
• 0º to 40º C (32º to 104º F)
STORAGE TEMPERATURE
-20º to 70º C (-4º to 158º F)
HUMIDITY
• 20% to 80% non-condensing
EMISSION (EMI), SAFETY & OTHER CERTIFICATIONS
• FCC
• CE
• C-Tick
1
The mobile device must have 3G support and subscribe to 3G service from the phone service
provider. The playback device must be equipped with 3G video playback such as RealPlayer
TM
or PacketVideo
TM
.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top