66

D-Link DAP-1522 User Manual

Section 3 - Configuration

Select the Time Zone from the drop-down menu.

To select Daylight Saving time manually, click the

Enable Daylight Saving

check box. Next, use the

drop-down menu to select a Daylight Saving Offset

and then enter a start date and an end date for

daylight saving time.

To manually input the time, enter the values in these

fields for the Year, Month, Day, Hour, Minute, and

Second and then click Save Settings. You can also

click the

Copy Your Computer’s Time Settings

button at the bottom of the screen.

Time Zone:

Daylight

Saving:

Date and

Time:

Time

The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system

clock. From this section you can set the time zone that you are in. Daylight Saving can also be configured to automatically

adjust the time when needed.

67

D-Link DAP-1522 User Manual

Section 3 - Configuration

Save To

Local Hard

Drive:

Load From

Local Hard

Drive:

Restore

To Factory

Default:

Reboot The

Device:

Clear

Language

Pack:

Use this option to save the current access point

configuration settings to a file on the hard disk of

the computer you are using. First, click the

Save

button. You will then see a file dialog, where you can

select a location and file name for the settings.

Use this option to load previously saved access

point configuration settings. First, use the Browse

control to find a previously save file of configuration

settings. Then, click the

Load

button to transfer

those settings to the access point.

This option will restore all configuration settings

back to the settings that were in effect at the time

the access point was shipped from the factory.

Any settings that have not been saved will be lost,

including any rules that you have created. If you

want to save the current access point configuration

settings, use the

Save

button above.

Click to reboot the bridge.

Click to clear the language pack. This will put the web UI back to English.

System

68

D-Link DAP-1522 User Manual

Section 3 - Configuration

Browse:

Upload:

After you have downloaded the new firmware, click

Browse

to locate the firmware update on your

hard drive. Click

Upload

to complete the firmware

upgrade.

Once you have a firmware update on your computer,

use this option to browse for the file and then upload

the information into the bridge.

Firmware

You can upgrade the firmware of the access point here. Make sure the firmware you want to use is on the local hard

drive of the computer. Click on

Browse

to locate the firmware file to be used for the update. Please check the D-Link

support site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive

from the D-Link support site.

After you have downloaded the new language

pack, click

Browse

to locate the language pack

file on your hard drive. Click

Upload

to complete

the language pack upgrade.

Language Pack

You can change the language of the web UI by

uploading available language packs.

Browse:

69

D-Link DAP-1522 User Manual

Section 3 - Configuration

If you load a language pack and would like to go back to English, click

Maintenance

>

System

and click on

Clear

next

to

Clear Language Pack

.

70

D-Link DAP-1522 User Manual

Section 3 - Configuration

Displays the access point’s time and firmware

version.

Displays the MAC address and the private (local)

IP settings for the access point.

Displays the wireless MAC address and your

wireless settings such as SSID and Channel.

General:

LAN:

Wireless LAN:

Status

Device Info

This page displays the current information for the DAP-1522. It will display the LAN and wireless LAN information.