1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DAP-1522-Bridge-Mode
    5. /
  5. 12
Page 56 / 100 Scroll up to view Page 51 - 55
56
D-Link DAP-1522 User Manual
Section 3 - Configuration
The following screen opens to indicate that you have
successfully saved your new settings.
If you choose WPA2, enter the WPA2 Personal
Passphrase and click Next to complete the Setup
Wizard.
Page 57 / 100
57
D-Link DAP-1522 User Manual
Section 3 - Configuration
Wireless
Mode:
Site Survey:
Enable
Wireless:
Wireless
Network
Name:
802.11 Band
802.11 Mode:
Enable Auto
Channel Scan:
Wireless
Channel:
Select Infrastructure to connect to a wireless (AP) Access
Point, select Ad-hoc to connect to another bridge or wireless
station.
A function that looks for available wireless networks.
Click the check box to enable the wireless function. If you
do not want to use wireless, uncheck the box to disable all
the wireless functions.
Service Set Identifier (SSID) is the name of your wireless
network. Create a name using up to 32 characters. The SSID
is case-sensitive.
The options include 2.4GHz, 5GHz, and 2.4GHz/5GHz. This
option is unavailable in Bridge Mode.
If all of the wireless devices in your wireless network can
connect in the same transmission mode, you can improve
performance slightly by choosing the appropriate “Only”
mode. If you have some devices that use a different
transmission mode, choose the appropriate “Mixed” mode.
This option is unavailable in Bridge Mode.
The Auto Channel Scan setting is used to allow the
DAP-1522 to choose the channel with the least amount of
interference.
This option is unavailable in Bridge Mode.
Indicates the channel setting for the DAP-1522. The Channel
can be changed to fit the channel setting for an existing
wireless network or to customize the wireless network. This
option is unavailable in Bridge Mode.
Wireless
Page 58 / 100
58
D-Link DAP-1522 User Manual
Section 3 - Configuration
Transmission
Rate:
Channel Width:
Visibisibility
Status:
Security Mode:
Enable:
Select the transmit rate. It is strongly suggested to select Best (automatic) for best performance. This option is unavailable
in Bridge Mode.
Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
This setting determines whether the DAP-1522 will continue to periodically broadcast its presence on the network. This option
is unavailable in Bridge Mode.
Refer to page 65 for more information regarding wireless security.
Enable the Wi-Fi Protected Setup feature.
Enabling this option allows the user to manually assign the source MAC address to packets forwarded by the DAP-1522. If not
manually assigned, the packet’s source MAC address field will be automatically selected as the DAP-1522’s MAC address.
Wireless MAC Cloning
MAC Address:
Scan:
Enter the desired MAC address connected to your DAP-1522 to enable the clone function.
Click the
Scan
button to search for all available devices connected to your DAP-1522’s Ethernet ports
Page 59 / 100
59
D-Link DAP-1522 User Manual
Section 3 - Configuration
LAN
Connection
Type:
Access Point
IP Address:
Subnet Mask:
Default
Gateway:
Device Name:
Use the drop-down menu to select
Static IP
if
your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. Select
Dynamic IP (DHCP)
to automatically assign an
IP address to the computers on the LAN/private
network.
Enter the IP address assigned by your ISP.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
Enter the Device Name of the AP and click
Next
to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the subnet.
This section will allow you to change the local network settings of the bridge and to configure the Static settings.
Network Settings
Static
Page 60 / 100
60
D-Link DAP-1522 User Manual
Section 3 - Configuration
DHCP
Select DHCP to automatically obtain an IP address
on the LAN/private network.
Enter the Device Name of the AP and click
Next
to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the subnet.
LAN Connection
Type:
Device Name:

Rate

4.3 / 5 based on 4 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top