Page 41 / 100 Scroll up to view Page 36 - 40
41
D-Link DAP-1522 User Manual
Section 3 - Configuration
Browse:
Upload:
After you have downloaded the new firmware,
click Browse to locate the firmware update on your
hard drive. Click Upload to complete the firmware
upgrade.
Once you have a firmware update on your computer,
use this option to browse for the file and then upload
the information into the access point.
Firmware
You can upgrade the firmware of the access point here. Make sure the firmware you want to use is on the local hard
drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link
support website for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard
drive from this site.
After you have downloaded the new language
pack, click
Browse
to locate the language pack file
on your hard drive. Click
Upload
to complete the
language pack upgrade.
Language Pack
You can change the language of the web UI by
uploading available language packs.
Browse:
Page 42 / 100
42
D-Link DAP-1522 User Manual
Section 3 - Configuration
If you load a language pack and would like to go back to English, click
Maintenance
>
System
and click on
Clear
next
to
Clear Language Pack
.
Page 43 / 100
43
D-Link DAP-1522 User Manual
Section 3 - Configuration
General:
LAN:
Wireless LAN:
Displays the access point’s time and firmware
version.
Displays the MAC address and the private (local)
IP settings for the access point.
Displays the wireless MAC address and your
wireless settings such as SSID and Channel.
Status
Device Info
This page displays the current information for the DAP-1522. It will display the LAN and wireless LAN information.
Page 44 / 100
44
D-Link DAP-1522 User Manual
Section 3 - Configuration
Wireless
The wireless section allows you to view the wireless clients that are connected to your wireless access point.
MAC Address:
UpTime:
Mode:
Signal:
The Ethernet ID (MAC address) of the wireless
client.
Displays the amount of time the wireless client has
been connected to the access point.
The transmission standard being used by the client.
Values are 11a, 11b, 11g, 11ng or 11na for 802.11a,
802.11b, 802.11g or 802.11n respectively.
This is a relative measure of signal quality. The
value is expressed as a percentage of theoretical
best quality. Signal quality can be reduced by distance, by interference from other radio-frequency sources (such as cordless
telephones or neighboring wireless networks), and by obstacles between the access point and the wireless device.
Page 45 / 100
45
D-Link DAP-1522 User Manual
Section 3 - Configuration
What to View:
Enable
Remote Log:
Apply Log
Settings Now:
Refresh:
Clear:
Save Log:
There are three types of logs that can be viewed:
System Activity, Wireless Activity, and Notice. Tick
the corresponding check box for the type(s) that
you want displayed in the log.
Select the check box and enter a Log Server name
or IP address to enable the remote log feature.
Click this button to immediately filter the log results
so that only the selected options appear in the Log
Details section of this screen.
Updates the log details on the screen so it displays
any recent activity.
Clear all of the log contents.
This option will save the access point to a log file
on your computer.
Logs
The access point automatically logs (records) events of possible interest in its internal memory. If there isn’t enough
internal memory for all events, logs of older events are deleted, but logs of the latest events are retained. The Logs
option allows you to view the access point logs. You can define what types of events you want to view and the level
of the events to view. This access point also has external Syslog Server support so you can send the log files to a
computer on your network that is running a Syslog utility

Rate

4.3 / 5 based on 4 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top