D-Link DAP-1522-Bridge-Mode Router Manual PDF (Setup & Configuration Guide)

Page 21 / 100 Scroll up to view Page 16 - 20

21

D-Link DAP-1522 User Manual

Section 3 - Conﬁguration

If you select

WEP

encryption, the following screen will

show you your network key to enter on your wireless

clients.

Click

Save

to ﬁnish the Setup Wizard.

For

WEP

encryption, enter a Network Key exactly 5 or

13 characters long or exactly 10 or 26 characters using

0-9 and A-F.

Click

Page 22 / 100

22

D-Link DAP-1522 User Manual

Section 3 - Conﬁguration

This Wizard is designed to assist you in your wireless network setup. It will guide you through step-by-step instructions

on how to set up your wireless network and how to make it secure.

Select

to use your

number from your wireless

device to connect to your network.

For

PBC

conﬁguration, skip to page 23.

Click

Connect

to continue.

Start

WPS

on the wireless device you are adding to you

wireless network to complete the setup.

Add Wireless Device With WPS

Page 23 / 100

23

D-Link DAP-1522 User Manual

Section 3 - Conﬁguration

Press down the

Push Button

on the wireless device

that you are adding to your network to complete the

setup.

Select

PBC

to use the Push Button Conﬁguration in

order to connect to your network.

Click

Connect

to continue.

Page 24 / 100

24

D-Link DAP-1522 User Manual

Section 3 - Conﬁguration

Wireless

Mode:

Enable

Wireless:

Wireless

Network

Name:

802.11 Band:

802.11 Mode:

The current wireless mode is set to Access Point, it

will create a wireless infrastructure network.

Check the box to enable the wireless function. If

you do not want to use wireless, uncheck the box to

disable all the wireless functions.

When you are browsing for available wireless

networks, this is the name that will appear in the list

(unless Visibility Status is set to Invisible, see below).

This name is also referred to as the SSID. For security

purposes, it is highly recommended to change from

the pre-conﬁgured network name.

Operating frequency band. Choose 2.4GHz for

visibility to legacy devices and for longer range.

Choose 5GHz for least interference.

If you choose 2.4GHz band, then select one of the

following:

Mixed 802.11n, 802.11g and 802.11b

- Select if you

are using a mix of 802.11n, 11g, and 11b wireless

clients.

802.11b Only

- Select if you are only using 802.11b

wireless clients.

802.11g Only

- Select if you are only using 802.11g

wireless clients.

802.11n Only

- Select if you are only using 802.11n

wireless clients.

Mixed 802.11g and 802.11b -

Select if you are using a mix of 802.11g and 11b wireless clients.

Mixed 802.11n and 802.11g

- Select if you are using a mix of 802.11n and 11g wireless clients.

If you choose 5GHz band, then select either

802.11a Only, 802.11n Only,

or

Mixed 802.11n and 802.11a.

Manual Conﬁguration

Wireless Settings

Page 25 / 100

25

D-Link DAP-1522 User Manual

Section 3 - Conﬁguration

The Auto Channel Scan setting can be selected to allow the DAP-1522 to choose the channel with the least amount of

interference.

Indicates the channel setting for the DAP-1522.

The Channel can be changed to ﬁt the channel setting for an existing

wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out.

Select the transmit rate. It is strongly suggested to select

Best (automatic)

for best performance.

Select the Channel Width:

Auto 20/40

- Select if you are using both 802.11n and non-802.11n wireless devices.

20MHz

- Select if you are not using any 802.11n wireless clients.

Select

Invisible

if you do not want the SSID of your wireless network to be broadcasted by the DAP-1522. If Invisible is

selected, the SSID of the DAP-1522 will not be seen by Site Survey utilities so your wireless clients will have to know the

SSID of your DAP-1522 in order to connect to it.

Refer to page 65 for more information regarding the wireless security.

Enable the Wi-Fi Protected Setup feature.

Locking the wireless security settings prevents the settings from being changed by any new external user using its PIN. Devices

can still be added to the wireless network using Wi-Fi Protected Setup. It is still possible to change wireless network settings

with Manual Wireless Network Setup, Wireless Network Setup Wizard, or an existing external WLAN Manager user.

Shows the current value of the access point’s PIN.

Create a random number that is a valid PIN. This becomes the access point’s PIN. You can then copy this PIN to the user

interface of the user.

Restore the default PIN of the access point.

Resets Wi-Fi Protected Status to Not Conﬁgured. Vista WPS icon will only be displayed when the Wi-Fi Protected Status

is Not Conﬁgured.

Enable Auto

Channel Scan:

Wireless

Channel:

Transmission

Rate:

Channel Width:

Visibility

Status:

Security Mode:

Enable:

Lock Wireless

Security

Settings:

Current PIN:

Generate New

PIN:

Reset PIN to

Default:

Reset to

Unconﬁgured:

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share