Page 81 / 100
Scroll up to view Page 76 - 80
81
D-Link DAP-1522 User Manual
Section 5 - Connecting to a Wireless Network
Configure WEP
It is recommended to enable WEP on your wireless bridge or access point before configuring your wireless adapter.
If you are joining an existing network, you will need to know the WEP key being used.
2. Highlight the wireless network (SSID) you would like to
connect to and click
Connect.
1. Open the Windows
®
XP Wireless Utility by right-clicking
on the wireless computer icon in your system tray
(lower-right corner of screen). Select
View Available
Wireless Networks.
Page 82 / 100
82
D-Link DAP-1522 User Manual
Section 5 - Connecting to a Wireless Network
3. The
Wireless Network Connection
box will appear. Enter the
same WEP key that is on your access point and click
Connect.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the WEP settings are correct.
The WEP key must be exactly the same as on the wireless access
point.
Page 83 / 100
83
D-Link DAP-1522 User Manual
Section 5 - Connecting to a Wireless Network
Configure WPA-PSK
It is recommended to enable WEP on your wireless bridge or access point before configuring your wireless adapter.
If you are joining an existing network, you will need to know the WEP key being used.
2. Highlight the wireless network (SSID) you would like to
connect to and click
Connect.
1. Open the Windows
®
XP Wireless Utility by right-clicking
on the wireless computer icon in your system tray
(lower-right corner of screen). Select
View Available
Wireless Networks.
Page 84 / 100
84
D-Link DAP-1522 User Manual
Section 5 - Connecting to a Wireless Network
3. The
Wireless Network Connection
box will appear. Enter the
WPA-PSK passphrase and click
Connect.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the WPA-PSK settings are correct.
The WPA-PSK passphrase must be exactly the same as on the
wireless access point.
Page 85 / 100
85
D-Link DAP-1522 User Manual
Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network
Using Windows
®
Vista
Windows
®
Vista users may use the convenient, built-in wireless utility. Follow these instructions:
From the Start menu, go to Control Panel, and then click on
Network and Sharing Center
.
The utility will display any available wireless networks in your
area. Click on a network (displayed using the SSID) under
Select a network to connect to and then click the
Connect
button.
19216811.live