DG-BR4000NG User Manual

51

Following are the types of Internet connection:

Dynamic IP

- Please go to

section 2-5-1

Static IP

- Please go to

section 2-5-2

PPPoE

- Please go to

section 2-5-3

PPTP

- Please go to

section 2-5-4

L2TP

- Please go to

section 2-5-5

DNS

- Please go to

section 2-5-6

DDNS

- Please go to

section 2-5-7

WISP

- Please go to

section 2-5-8

2-5-1 Setup procedure for ‘Dynamic IP’

:

Here is the description of every setup item:

Parameter

Description

Host Name

Please input the host name of your

computer. This is optional, and is only

required if your service provider asks

you to do so.

MAC Address

Please input MAC address of your

computer, if your service provider only

permits computer with certain MAC

address to access internet. If you’re

using the computer which used to

connect to Internet via cable modem,

you can simply press ‘Clone Mac

address’ button to fill the MAC address

field with the MAC address of your

computer.

DG-BR4000NG User Manual

52

After you finish with all settings, please click ‘Apply’; if you want to remove any

value you entered, please click ‘Cancel’.

After you click ‘Apply’, the following message will be displayed on your web

browser:

Please click ‘Continue’ to go back to previous setup menu; to continue on router

setup, or click ‘Apply’ to reboot the router so the settings will take effect (Please

wait for about 30 seconds while router is rebooting).

DG-BR4000NG User Manual

53

2-5-2 Setup procedure for ‘Static IP’

:

Here is the description of every setup item:

Parameter

Description

IP Address

Please input the IP address assigned by

your service provider.

Subnet Mask

Please input the subnet mask assigned by

your service provider

Default Gateway

Please input the IP address of the

gateway

provided

by

your

service

provider.

After you finish with all settings, please click ‘Apply’ button and the following

message will be displayed on your web browser:

If you want to reset all settings in this page back to previously-saved value, please

click ‘Cancel’ button.

Please click ‘Continue’ to go back to previous setup menu; to continue on other

setup procedures, or click ‘Apply’ to reboot the router so the settings will take effect

(Please wait for about 30 seconds while router is rebooting).

DG-BR4000NG User Manual

54

2-5-3 Setup procedure for ‘PPPoE’

:

Here is the description of every setup item:

Parameter

Description

User Name

Please input user name assigned by your

Internet service provider here.

Password

Please input the password assigned by

your Internet service provider here.

Service Name

Please give a name to this Internet

service, this is optional

MTU

Please input the MTU value of your

network connection here. If you don’t

know, you can use default value.

Connection Type

Please select the connection type of

Internet connection you wish to use.

Continuous

– The connection will be

kept always On. If the connection is

interrupted, the router will re-connect

automatically.

Connect On-Demand

– Only connect

when you want to surf the Internet. “Idle

Time Out” is set to stop the connection

when the network traffic is not sending

or receiving after an idle time.

DG-BR4000NG User Manual

55

Manual

– After you have selected this

option, you will see the “Connect”

button and “Disconnect” button, click

“Connect” and the router will connect to

the ISP. If you want to stop the

connection, please click “Disconnect”

button.

Idle Time Out

If you have selected the connection type

to “Connect-On-Demand”, please input

the idle time out.

After you finish with all settings, please click ‘Apply’ button and the following

message will be displayed on your web browser:

If you want to reset all settings in this page back to previously-saved value, please

click ‘Cancel’ button

Please click ‘Continue’ to go back to previous setup menu; to continue on other

setup procedures, or click ‘Apply’ to reboot the router so the settings will take effect

(Please wait for about 30 seconds while router is rebooting).