DG-BR4000NG User Manual

56

2-5-4 Setup procedure for ‘PPTP’

:

PPTP requires two kinds of settings: WAN interface setting (setup IP address) and

PPTP setting (PPTP user name and password).

Here we start from WAN interface setting:

Here you select the type of how to obtain the IP address from your service provider.

You can choose ‘Obtain an IP address automatically’ (i.e. DHCP, please refer to

‘Cable Modem’ section 2-3-1), or ‘Use the following IP address’ (i.e. static IP

address, please refer to

Section 2-3-2

).

WAN interface settings must be correctly set, or the Internet connection will fail,

even though the PPTP settings are correct. Please contact your Internet service

provider if you don’t know what you should fill in these fields.

Now please go to PPTP settings section

DG-BR4000NG User Manual

57

Parameter

Description

User Name

Please

input

user

ID

(user

name)

assigned

by

your

Internet

service

provider here.

Password

Please input the password assigned by

your Internet service provider here.

PPTP Gateway

Please input the IP address assigned by

your Internet service provider here

Connection ID

Please input the connection ID here, this

is optional and you can leave it blank.

MTU

Please input the MTU value of your

network connection here. If you don’t

know, you can use default value.

BEZEQ-ISRAEL

Setting item ‘BEZEQ-ISRAEL’ is only

required to be enabled if you’re using the

service provided by BEZEQ network in

Israel.

Connection type

Please

select

the

type

of

Internet

connection you wish to use. Refer to

Note given in Section 2-3-3 Setup

procedure for ‘PPPoE xDSL’ for detailed

descriptions.

Idle Time Out

Please input the idle time out of Internet

connection you wish to use. Refer to

Note given in Section 2-3-3 Setup

procedure for ‘PPPoE xDSL’ for detailed

descriptions.

When you finish with all settings, please click ‘Apply’ button and the following

message will be displayed on your web browser:

If you want to reset all settings in this page back to previously-saved value, please

click ‘Cancel’ button

Please click ‘Continue’ to go back to previous setup menu; to continue on other

setup procedures, or click ‘Apply’ to reboot the router so the settings will take effect

(Please wait for about 30 seconds while router is rebooting).

DG-BR4000NG User Manual

58

2-5-5 Setup procedure for ‘L2TP’:

L2TP is another popular connection method for xDSL and other Internet connection

types,

Like PPTP, two kinds of settings are required, we’ll start from ‘WAN

Interface Settings’:

Please select the type of how you obtain IP address from your service provider here.

You can choose ‘Obtain an IP address automatically’ (i.e. DHCP, please refer to

‘Cable Modem’ section 2-3-1), or ‘Use the following IP address’ (i.e. Static IP

address, please refer to

Section 2-3-2

).

WAN interface settings must be correctly set, or the Internet connection will fail,

even though L2TP settings are correct. Please contact your Internet service provider

if you don’t know what you should fill in these fields.

Now please go to L2TP settings section:

DG-BR4000NG User Manual

59

Here is the description of every setup item:

Parameter

Description

User Name

Please

input

user

ID

(user

name)

assigned

by

your

Internet

service

provider here.

Password

Please input the password assigned by

your Internet service provider here.

L2TP Gateway

Please input the IP address of L2TP

gateway

assigned

by

your

Internet

service provider here.

MTU

Please input the MTU value of your

network connection here. If you don’t

know, you can use default value.

Connection type

Please select the connection type of

Internet connection you wish to use.

Refer to Note given in Section 2

-3-3

Setup procedure for ‘PPPoE xDSL’

for

detailed descriptions.

Idle Time Out

Please input the idle time out of Internet

connection you wish to use. Refer to

Note given in Section 2

-3-3 Setup

procedure

for

‘PPPoE

xDSL’

for

detailed descriptions.

When you finish with all settings, please click ‘Apply’ button and the following

message will be displayed on your web browser:

If you want to reset all settings in this page back to previously-saved value, please

click ‘Cancel’ button.

Please click ‘Continue’ to go back to previous setup menu; to continue on other

setup procedures, or click ‘Apply’ to reboot the router so the settings will take effect

(Please wait for about 30 seconds while router is rebooting).

DG-BR4000NG User Manual

60

2-5-6 Setup procedure for ‘DNS’:

If you select ‘

Dynamic IP

’ or ‘

PPPoE

’ as Internet connection method, at least one

DNS server’s IP address should be assigned automatically. However, if you have

preferred DNS server, or your service provider didn’t assign the IP address of DNS

server because of any reason, you can input the IP address of DNS server here.

Here is the description of every setup item:

Parameter

Description

Primary DNS

Please input the IP address of DNS

server provided by your service provider.

Secondary DNS

Please input the IP address of another

DNS server provided by your service

provider, this is optional.

NOTE: Only IP address can be entered here;

DO NOT

use the

hostname of DNS server! (i.e. only numeric characters and dots are

accepted)

10.20.30.40……………………………………………………………… Correct

dns.serviceprovider.com…………………………………………... Incorrect