Page 71 / 144
Scroll up to view Page 66 - 70
DG-BR4000NG User Manual
71
After you clicked ‘Add’, the MAC address and IP address mapping will be added
to ‘Static DHCP Leases Table’ section.
If you want to delete a specific item, please check the ‘Select’ box of a MAC
address and IP address mapping, then click ‘Delete’ button; if you want to delete
all mappings, click ‘Delete All’.
After you finish all LAN settings, please click ‘Apply’ button on this page. After you
click ‘Apply’, the following message will be displayed on your web browser:
Please click ‘Continue’ to go back to previous setup menu; to continue on router
setup, or click ‘Apply’ to reboot the router so the settings will take effect (Please
wait for about 30 seconds while router is rebooting).
Page 72 / 144
DG-BR4000NG User Manual
72
2-7 Wireless LAN Configurations
If your computer, PDA, game console, or other network devices are equipped
with wireless network interface, you can use the wireless function of this router to
let them connect to Internet and share resources with other computers with wired-
LAN connection. You can also use the built-in security functions to protect your
network from being intruded by malicious intruders.
Please follow the instructions mentioned below to set wireless parameters:
Ensure that Radio ON/OFF switch at the rear side of the router is in ON position.
Next, click ‘General Setup’ menu on the left of web management interface, then
click ‘Wireless’ menu on the left of web management interface, and the following
message will be displayed on your web browser.
Note: If the Radio ON/OFF switch is in OFF position then the ‘Wireless
Module’ will appear as ‘Disable’ in the above screen.
Page 73 / 144
DG-BR4000NG User Manual
73
2-7-1 Basic Wireless Settings
Please click ‘Basic Settings’, and the following message will be displayed on your
web browser:
This wireless router can work in 6 modes:
a.
Access Point
- Standard wireless AP .
b.
Station (Infrastructure)
-
Configure the router to Ethernet device such as TV, Game
player, HDD & DVD to enable the Ethernet device to be
a wireless station.
c.
AP Bridge (Point to Point)
-
Connect this router with another wireless router, to
expand the scope of network.
d.
AP Bridge (Point to Multi-Point) -
Connect this router with up to four other wireless
routers, to expand the scope of network.
e.
AP Bridge (WDS) -
Connect this router with up to four WDS-capable wireless
routers, to expand the scope of network.
f.
Universal Repeater
-
The router can act as Station and AP at the same time. It can
use Station function to connect to a Root AP and use AP
function to service all wireless stations within its coverage.
Page 74 / 144
DG-BR4000NG User Manual
74
NOTE: For ‘AP Bridge-Point to Point’ and ‘AP Bridge-Point to Multi-
Point’ mode, wireless router is operated in wireless bridge dedicated
mode – wireless router is only used to expand the scope of network,
and no wireless clients will be accepted. If you want to use your
wireless router to expand the scope of network, and also accept
wireless clients, please select ‘AP Bridge-WDS’ or ‘Universal
Repeater‘ mode.
Please select a proper operation mode you want to use from ‘Mode’ dropdown
menu, and continue with other operation mode specific settings:
Access Point
- Please go to
section 2-7-1-1
Station-Infrastructure
- Please go to
section 2-7-1-2
AP Bridge-Point to Point
- Please go to
section 2-7-1-3
AP Bridge-Point to Multi-Point
- Please go to
section 2-7-1-4
AP Bridge-WDS
- Please go to
section 2-7-1-5
Universal Repeater
- Please go to
section 2-7-1-6
Page 75 / 144
DG-BR4000NG User Manual
75
2-7-1-1 Setup procedure for ‘Access Point’:
Please select the radio Band you want to use from ‘Band’ dropdown menu, and the
following message will be displayed:
Here is the description of every setup item:
Parameter
Description
Band
Please select the radio band from one of
following options:
2.4 GHz (B) - This band, only allows
802.11b
wireless
network
client
to
connect to this router (maximum transfer
rate 11Mbps).
2.4 GHz (N) - This band, only allows
802.11n
wireless
network
client
to
connect to this router (maximum transfer
rate 150Mbps).
2.4 GHz (B+G) - This band, only allows
802.11b and 802.11g wireless network
client
to
connect
to
this
router
(maximum transfer rate 11Mbps for
802.11b clients, and maximum 54Mbps
for 802.11g clients).
2.4 GHz (G) - This band, only allows
802.11g
wireless
network
client
to
connect to this router (maximum transfer
rate 54Mbps).
2.4 GHz (B+G+N) - This band, allows
802.11b, 802.11g, and 802.11n wireless
19216811.live