Digisol DG-BR4000N Router Manual PDF (Setup & Configuration Guide)

Page 46 / 144 Scroll up to view Page 41 - 45

DG-BR4000NG User Manual

46

2-4-2 Change management password

Default password of this router is 1234, and it’s displayed on the login prompt when

accessed from web browser. There’s a security risk if you don’t change the default

password, since everyone can see it. This is very important when you have wireless

function enabled.

To change password, please follow the instructions mentioned below:

Please click ‘System’ menu on the left of web management interface, then click

‘Password Settings’, and the following screen will be displayed on your web

browser:

Here is the description of every setup item:

Parameter

Description

Current Password

Please input current password here.

New Password

Please input new password here.

Confirm Password

Please input new password here again.

When you finish, click ‘Apply’. If you want to keep original password unchanged,

click ‘Cancel’.

If the password you typed in ‘New Password’ and ‘Confirm Password’ fields is not

the same, you’ll see the following message:

Page 47 / 144

DG-BR4000NG User Manual

47

Please retype the new password again and click ‘Apply’.

If the current and new passwords are correctly entered, after you click ‘Apply’,

you’ll be prompted to input your new password:

Please input user name as ‘admin’ and new password to enter web management

interface again, and you should be able to login with new password.

Page 48 / 144

DG-BR4000NG User Manual

48

2-4-3 Remote Management

This router does not allow management access from Internet, to prevent possible

security risks (especially when you define a weak password, or didn’t change default

password). However, you can still manage this router from a specific IP address by

enabling the ‘Remote Management’ function.

To do so, please follow the instructions mentioned below:

Please click ‘System’ menu on the left of web management interface, then click

‘Remote Management’, and the following screen will be displayed on your web

browser:

Here is the description of every setup item:

Parameter

Description

Host Address

Input the IP address of the remote host

you wish to initiate a management

access.

Port

You can define the port number through

which this router should expect an

incoming request. If you’re providing a

web service (default port number is 80),

you should try to use other port number.

You can use the default port setting

‘8080’ or something like ‘32245’ or

‘1429’. (Any integer between 1 and

65535)

Enabled

Select the field to start the configuration.

Page 49 / 144

DG-BR4000NG User Manual

49

When

you finish, click ‘Apply’. You’ll see the following message displayed on web

browser:

Press ‘Continue’ to save the settings made and go back to web management

interface; press ‘Apply’ to save the settings made and restart the router, so the

settings will take effect after it reboots.

NOTE: When you want to manage this router from another computer

on internet, you have to input the IP address and port number of this

router in the address bar of the web browser manually If your Internet

service provider assigns you with a static IP address, it will not be a

problem; but if the IP address your service provider assigns to you

will vary every time you establish an internet connection, this will be a

problem.

Please either ask your service provider to give you a static IP address,

or use dynamic IP to host name mapping services like DDNS. Please

refer to chapter 2-5-7 ‘DDNS client’ for details.

NOTE: Default port number the web browser will use is ‘80’. If the ‘Port’

setting in this page is not ‘80’, you have to assign the port number in

the address bar of web browser manually. For example, if the IP

address of this router is 1.2.3.4, and the port number you set is 8888,

you have to input following address in the address bar of web

browser:

http://1.2.3.4:8888

Page 50 / 144

DG-BR4000NG User Manual

50

2-5 Setup Internet Connection (WAN Setup)

Internet connections setup can be done by using ‘Quick Setup’ menu described in

chapter 2-3

. However, you can setup WAN connections by using WAN

configuration menu. You can also set advanced functions like DDNS (Dynamic

DNS) here.

To start configuration, please follow the instructions mentioned below:

Click ‘General Setup’ menu on the left of web management interface, then click

‘WAN’ menu, and the following message will be displayed on your web browser:

Please select an Internet connection method depending on the type of connection

you’re using. You can either click the connection method on the left or right of the

web management interface. If you select the connection method on the right, please

click ‘More Configuration’ tab after a method is selected.

Rate

Popular Digisol Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share