Page 31 / 144
Scroll up to view Page 26 - 30
DG-BR4000NG User Manual
31
2. Select ‘Use the following IP address’, then input the following
settings in respective field:
IP address: 192.168.2.2
Subnet Mask: 255.255.255.0
Click ‘OK’ when finish.
Page 32 / 144
DG-BR4000NG User Manual
32
2-2-5
Connecting the router’s management interface by web browser
After you assign an IP address to the computer, open the web browser, and type the
The following message should be shown:
Please input user name and password in the field respectively, default user name is
‘admin’, and default password is ‘1234’, then press ‘OK’ button, and you can see the
web management interface of this router:
Page 33 / 144
DG-BR4000NG User Manual
33
NOTE: If you can’t see the web management interface, and you’re
being prompted to input user name and password again, it means
you didn’t input username and password correctly. Please retype
user name and password again. If you’re certain about the user name
and password you typed please go to ‘4-2 Troubleshooting’ to
perform a factory reset, to set the password back to default value.
TIP: This page shows the four major setting categories: Quick Setup,
General Setup, Status, and Tools. You can find the shortcut which
leads to these setting categories at the top of every page, and you
can jump to another category directly by clicking the link, and don’t
have to go back to the first page.
2-3 Using Quick Setup
This router provides a ‘Quick Setup’ procedure, which will help you to complete all
required settings you need to access the Internet in very short time. Please follow the
instructions mentioned below to complete the ‘Quick Setup’:
Please go to Quick Setup menu by clicking ‘Quick Setup’ button.
HERE
Page 34 / 144
DG-BR4000NG User Manual
34
And the following message will be displayed:
Here is the description of every setup item:
Parameter
Description
Time Zone
Click the
button, drop-down menu
will be shown, and you can choose a
time zone of the location you live.
Time Server Address
Input the IP address of time server here.
Daylight Savings
If the country you live in uses daylight
saving, please check ‘Enable Function’
box, and choose the duration of daylight
saving.
NOTE: There are several time servers available on internet, few are
listed below:
129.6.15.28 (time-a.nist.gov)
132.163.4.101 (time-a.timefreq.bldrdoc.gov)
131.107.1.10 (time-nw.nist.gov)
If you find that the time on the router is incorrect, try another time server.
Page 35 / 144
DG-BR4000NG User Manual
35
After you finish with all settings, please click ‘Next’ button.
Below given
‘WAN Type’
screen will appear.
Please choose the broadband (Internet connection) type you’re using in this page.
There are five types of Internet connection, they are:
Cable Modem
- Please go to section 2-3-1
Fixed-IP xDSL
- Please go to
section 2-3-2
PPPoE xDSL
- Please go to section 2-3-3
PPTP xDSL
- Please go to section 2-3-4
L2TP xDSL
- Please go to section 2-3-5
If you’re not sure, please contact your Internet service provider. A wrong Internet
connection type will cause connection problem, and you will not be able to connect
to internet
If you want to go back to previous step, please press ‘Back’ button at the bottom of
this page.
NOTE: Some service providers use ‘DHCP’ (Dynamic Host
Configuration Protocol) to assign IP address to your router. In this
case, you can choose ‘Cable Modem’ as Internet connection type.
19216811.live