Page 16 / 144
Scroll up to view Page 11 - 15
DG-BR4000NG User Manual
16
Software Installation:-
Insert the Setup CD into your CD-ROM drive of notebook/desktop computer.
Explore the CD and execute the
“EZWizard.exe”
file.
Below given screen will
appear. Click
'Next'
to Continue.
Page 17 / 144
DG-BR4000NG User Manual
17
Connect one end of a network cable to the WAN port of the router and the other
end to the DSL/Cable modem. Click ‘
Next’
to continue.
Connect one end of the provided network cable to one of the LAN ports (1~4) of
the router and the other end to your computer. Click ‘
Next’
to continue with the
installation.
Page 18 / 144
DG-BR4000NG User Manual
18
Power on the Router. It will take approximately 30 seconds for the router to boot
up completely. Ensure that all the LED’s on the router are ON. If not, try the
above steps again else click
‘Next’
to continue.
Enter the Router’s password to log in to the Router. The default password is
“1234”. It is recommended to change the router’s password to protect it from
being accessed by other users. If you do not wish to change the current
password, you can leave “New Password” and “Confirm New Password” fields
blank. Click
‘Log in’
to continue.
Page 19 / 144
DG-BR4000NG User Manual
19
Verify the Internet Connection Type the wizard has detected. If it is not correct,
please configure it manually. Click ‘
Next’
to continue.
Note: If you are not sure which Internet Connection Type you use, please contact
your Internet Service Provider for this information.
Enter the settings for your Internet Connection Type.
Dynamic IP (Cable Modem users)
Click on
‘Clone’
to clone the MAC address of your PC with the WAN port of the router, then
click ‘
Next’ to continue
.
abc
Page 20 / 144
DG-BR4000NG User Manual
20
PPPoE (DSL users)
Enter the user name and password provided by your ISP then click ‘
Next’
.
Please wait while the Wizard tries to connect to the Internet. If you see the
window “Internet Connection Succeed”, your router has been successfully
connected to the Internet. Please click ‘
Next’
to configure the wireless settings.
19216811.live