36

5.

After the configuration is successful, click

Next to Wireless

button and you may proceed to

configure the Wireless setting. The 7800VDP(O)X supports dual-band wireless, here you can set to

activate wireless on which band or both and set the SSID and encryption Key

(1. Leave it empty to

disable the wireless security; 2. Fill in the Key, and the encryption mode will be WPA2-PSK/AES)

.

6.

Continue to set 5GHz wireless.

7.

Set the VoIP parameters. First user should turn to a VoIP service provider to register a SIP

account, write down the registration information and fill it in the following blanks. For detail, please

refer to

VoIP

.

37

8.

In the above page, click finish to complete the EZSO settings.

Click

192.168.1.254

, it will lead you to the following page.

38

3G/LTE

1.

Select

3G/LTE,

press

Continue

to go on to next step.

2.

Enter the APN, username, password from your ISP, for settings about Authentication method, PIN,

etc, also refer to your ISP.

3.

Wait while the device is configured.

4.

WAN port configuration is success.

Click

Done

, web configuration will be loaded, you will enter the web configuration page.

39

5.

After the configuration is successful, click

Next to Wireless

button and you may proceed to

configure the Wireless setting. The 7800VDP(O)X supports dual-band wireless, here you can set to

activate wireless on which band or both and set the SSID and encryption Key

(1. Leave it empty to

disable the wireless security; 2. Fill in the Key, and the encryption mode will be WPA2-PSK/AES)

.

6. Continue to set 5GHz wireless.

7. Set the VoIP parameters. First user should turn to a VoIP service provider to register a SIP

account, write down the registration information and fill it in the following blanks. For detail, please

refer to

VoIP

.

40

8.

In the above page, click finish to complete the EZSO settings.

Click

192.168.1.254

, it will lead you to the following page.