1. Home
    2. /
  2. Manuals
    3. /
  3. Billion
    4. /
  4. BiPAC 7300NX

Billion BiPAC 7300NX Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Billion BiPAC 7300NX router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 10
BiPAC 7300NX
BiPAC 7300N
RE
(3G) / Wireless-N
ADSL2+ Firewall Router
Quick Start Guide
Downloaded from
www.Manualslib.com
manuals search engine
Page 2 / 10
Downloaded from
www.Manualslib.com
manuals search engine
Page 3 / 10
Downloaded from
www.Manualslib.com
manuals search engine
Page 4 / 10
Billion BiPAC 7300NX, 7300N
RE
(3G)/ Wireless-N ADSL2+ Firewall Router
1
Package Contents
BiPAC 7300NX, 7300N
RE
(3G) / Wireless-N ADSL2+ Firewall Router
CD containing the on-line manual and QSG
RJ-11 ADSL/ telephone cable
Ethernet (RJ-45) cable
Two 2dBi detachable antennas
Power adapter
Quick Start Guide
Splitter/ Micro-filter (Optional)
Attention
Warning
PLEASE READ THE QUICK START GUIDE AND FOLLOW THE
STEPS CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU
INSTALL THE DEVICE PROPERLY AND AVOID IMPROPER USAGE.
IF YOU NEED MORE INFORMATION ON THIS SOFTWARE
CONFIGURATION, PLEASE REFER TO THE USER MANUAL ON
CD-ROM.
°
Do not use the router in high humidity or high temperatures.
°
Do not use the same power source for the router as other
equipment.
°
Do not open or repair the case yourself. If the router is too hot,
turn off the power immediately and have it repaired at a qualified
service center.
°
Avoid using this product and all accessories outdoors.
°
Place the router on a stable surface.
°
Only use the power adapter that comes with the package. Using a
different voltage rating power adaptor may damage the router.
Downloaded from
www.Manualslib.com
manuals search engine
Page 5 / 10
Quick Start Guide
2
Hardware Overview
The Front LEDs
The Rear Ports
* Note 1. For advanced reset and restore setting, please refer to user manual.
.
2. For WPS configuration, please refer to the WPS section of user manual.
Connect with the
supplied power
adapter.
Connect the supplied
RJ-11 cable to this
port when connecting
to the ADSL/
telephone network.
(1) WPS
: Press 2-6 seconds until WPS LED
flashes green to trigger WPS function.
*2
(2) Wireless ON/OFF Switch
: Press over 6
seconds after WPS LED is off to switch on
wireless function. Press over 6 seconds
again for disable wireless function.
Flash green when
WPS configuration
is in progress.
Lit red when WAN port
fails to get IP address.
Lit green when WAN
port gets IP address
successfully.
Connect your
computer to a
LAN port with
the included
Ethernet cable.
Power
ON/OFF
switch
Blink green when power is
on and system is booting.
Lit green when the system
is ready. Lit Red if the
system is dead.
Lit green when a wireless
connection is established.
Blink when data is being
sent / received.
Lit green when the device
is successfully connected
to an ADSL DSLAM. (“Line
sync”).
When the device
power is on, press
to reset or to
restore its factory
default setting.
*1
Antenna
(BiPAC 7300NX Only)
Lit when the router is
connected to a USB
device.
(BiPAC 7300NX
Only)
Connect the USB
cable to this port.
(BiPAC 7300N
RE
Only)
EWAN: It offers its Ethernet
port #1 as a WAN port
for
connecting to Cable Modem,
VDSL, fiber modem or PON
optic lines with RJ-45 cable.
Lit when connected to an
Ethernet device. Lit green when
the speed of transmission hits
10/100Mbps; Blink when data is
being Transmitted / Received.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Popular Billion Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top