21

IPv4:

5. Select

Internet

Protocol

Version 4 (TCP/IPv4)

then click

Properties

.

6. In

the

TCP/IPv4

properties

window, select the Obtain an

IP

address

automatically

and

Obtain DNS Server address

automatically

radio

buttons.

Then click

OK

to exit the setting.

7. Click

OK

again in the

Local Area

Connection Properties

window

to apply the new configuration.

22

IPv6:

8. Select

Internet

Protocol

Version 6 (TCP/IPv6)

then click

Properties

.

9. In

the

TCP/IPv6

properties

window, select the Obtain an

IPv6 address automatically

and

Obtain DNS Server address

automatically

radio

buttons.

Then click

OK

to exit the setting.

10. Click

OK

again in the

Local Area

Connection Properties

window

to apply the new configuration.

23

Configuring a PC in Windows XP

IPv4:

1.

Go to

Start / Control Panel (in Classic

View)

. In the Control Panel, double-click

on

Network Connections

2.

Double-click

Local Area Connection

.

3.

In the

Local Area Connection Status

window, click

Properties

.

4.

Select

Internet Protocol (TCP/IP)

and

click

Properties

.

5.

Select the

Obtain an IP address

automatically

and

the

Obtain DNS

server address automatically

radio

buttons.

6.

Click

OK

to finish the configuration.

24

IPv6:

IPv6 is supported by Windows XP, but you should install it first.

Act as shown below:

1. On the desktop, Click Start > Run, type cmd, then press Enter key in the keyboard, the following screen

appears.

2. Key in command

ipv6 install

Configuration is OK now, you can test whether it works ok.

25

Configuring a PC in Windows 2000

1.

Go to Start > Settings > Control Panel.

In the Control Panel, double-click on Network

and Dial-up Connections.

2.

Double-click Local Area Connection.

3. In the Local Area Connection Status

window click Properties.

4.

Select Internet Protocol (TCP/IP) and

click Properties.

5.

Select

the

Obtain

an

IP

address

automatically and the Obtain DNS server

address automatically radio buttons.

6.

Click OK to finish the configuration.