41

Chapter 4: Configuration

Configuration via Web Interface

Open your web browser; enter the IP address of your router, which by default is 192.168.1.254, and

click

or press ‘Enter’ key on the keyboard, a login prompt window will appear. The default root

username and password are “admin” and “admin” respectively.

Congratulations! You are now successfully logged in to the Firewall Router!

42

Once you have logged on to your BiPAC 7800VDP(O)X

Router via your web browser, you can begin

to set it up according to your requirements. On the configuration homepage, the left navigation pane

links you directly to the setup pages, which include:

Status

(Summary, WAN, Statistics, Bandwidth Usage, 3G/LTE Status, Route, ARP, DHCP,

VPN(7800VDOX only), Log, VOIP, VRRP Status)

Quick Start

(Quick Start, VOIP Quick Setup)

Configuration

(LAN, Wireless 2.4G(wl0), Wireless 5G(wl1), WAN, System, USB, IP Tunnel,

Security, Quality of Service, NAT, Wake On LAN)

VoIP

(SIP Device, Service Provider, SIP Account, Call Forward, Call Through, Call Block, VoIP

Dial Plan, PSTN Dial Plan, Phone Book)

VPN

(IPSec, VPN Account, Exceptional Rule Group, PPTP, L2TP, GRE)

Advanced Setup

(Routing, DNS, Static ARP, UPnP, Certificate, Multicast, Management,

Diagnostics)

Note

:

VPN is only available for 7800VDOX.

43

Status

This Section gives users an easy access to the information about the working router and access to

view the current status of the router. Here

Summary

,

WAN

,

Statistics

,

Bandwidth Usage

,

3G/LTE Status

,

Route

,

ARP

,

DHCP

,

VPN (7800VDOX only)

,

Log

,

VoIP

and

VRRP Status

subsections are included.

(7800VDOX)

44

Summary

The basic information about the device is provided here (the following is a configured

screenshots to let users understand clearly).

Device Information

Model Name:

Displays the model name.

Host Name:

Displays the name of the router.

System Up-Time:

Displays the elapsed time since the device is on.

Date/Time:

Displays the current exact date and time. Sync button is to synchronize the

Date/Time with your PC time without regard to connecting to internet or not.

Software Version:

Firmware version.

LAN IPv4 Address:

Displays the LAN IPv4 address.

LAN IPv6 Address:

Displays the LAN IPv6 address. Default is a Link-Local address, but

when connects to ISP, it will display the Global Address, like above figure.

MAC Address:

Displays the MAC address.

DSL PHY and Driver Version:

Display DSL PHY and Driver version.

Wireless Driver Version:

Displays wireless driver version.

WAN

Line Rate – Upstream (Kbps):

Display Upstream line Rate in Kbps.

Line Rate – Downstream (Kbps):

Display Downstream line Rate in Kbps.

Default Gateway/IP4 Address:

Display Default Gateway and the IPv4 address.

Connection Time:

Display the elapsed time since ADSL connection is up.

Primary DNS Server:

Display IPV4 address of Primary DNS Server.

Secondary DNS Server:

Display IPV4 address of Secondary DNS Server.

Default IPv6 Gateway/IPv6 Address:

Display the IPv6 Gateway and the obtained IPv6

address.

45

WAN

This table displays the information of the WAN connections, users can turn here for WAN connection

information.

Interface:

The WAN connection interface.

Description:

The description of this connection.

Type:

The protocol used by this connection.

Status:

To disconnect or connect the link.

Connection Time:

The WAN connection time since WAN is up.

IPv4 Address:

The WAN IPv4 Address the device obtained.

IPv6 Address:

The WAN IPv6 Address the device obtained.

DNS:

The DNS address the device obtained.