51

Bandwidth Usage

Bandwidth Usage provides users direct view of bandwidth usage with simple diagram. Bandwidth

usage shows the use of the bandwidth from two angles: Transmitted and Received, giving users a

clear idea of the usage.

LAN

Note:

P4 can be configured as EWAN, and when the device is in EWAN profile, there is no

P4/EWAN interface as P4 is working as a WAN port.

(DSL)

Press

View LAN Transmitted

button to change the diagram to the statistics from a Received Bytes

of view. (

Note:

means Ethernet port #3, and the traffic information of the port #3 is identified with

green, the same color with P3 in the diagram; other ports all take the same mechanism.)

52

When you press

View WAN Traffic concurrently

button, the WAN Bandwidth Usage pops up so

that users can view the WAN traffic concurrently.

53

WAN Service

Press

View WAN Transmitted

button to change the diagram to the statistics from the Received

Bytes’ perspective.

54

Press

View LAN Traffic concurrently

button to directly switch to the LAN Bandwidth Usage page

to view the LAN traffic concurrently.

55

3G/LTE Status

Status:

The current status of the 3G/LTE card.

Signal Strength:

The signal strength bar indicates current 3G signal strength.

Network Name:

The network name that the device is connected to.

Network Mode:

The current operation mode for 3G/LTE card, it depends on service provider and

card’s limitation, GSM or UMTS.

Card Name:

The name of the 3G/LTE card.

Card Firmware:

The current firmware for the 3G/LTE card.

Current TX Bytes / Packets:

The statistics of transmission, count for this call.

Current RX Bytes / Packets:

The statistics of receive, count for this call.

Total TX Bytes / Packets:

The statistics of transmission, count from system ready.

Total RX Bytes / Packets:

The statistics of receive, count from system ready.

Total Connection Time:

The statistics of the connection time since system is ready.