Page 76 / 308
Scroll up to view Page 71 - 75
71
3
. Wait while the device is configured.
4
.
WAN port configuration is successful.
5
. After the configuration is successful, click
Next to Wireless
button and you may proceed to
configure the Wireless setting. The 7800VDP(O)X supports dual-band wireless, here you can set to
activate wireless on which band or both and set the SSID and encryption Key
(1. Leave it empty to
disable the wireless security; 2. Fill in the Key, and the encryption mode will be WPA2-PSK/AES).
6
. Continue to set 5GHz wireless.
Page 77 / 308
72
7
. Set the VoIP parameters. First user should turn to a VoIP service provider to register a SIP
account, please write down the registration information and fill it in the following blanks.
In this page, user can continue to add SIP account and configure dial plan, for more, please refer to
SIP Account
and
VoIP Plan
.
Page 78 / 308
73
If Quick Start is finished, user can turn to Status > Summary to see the basic information.
Page 79 / 308
74
Ethernet mode
1.
Select
Ethernet,
press
Continue
to go on to next step.
2.
Enter the username, password from your ISP, for IP and DNS settings; also refer to your ISP.
Here IPv6 service is enabled by default.
3.
Wait while the device is configured.
4.
WAN port configuration is successful.
Page 80 / 308
75
5.
After the configuration is successful, click
Next to Wireless
button and you may proceed to
configure the Wireless setting. The device supports dual-band wireless connections, in Quick Start
part, users can only enable or disable the wireless on the band and the exact SSID and encryption
Key
(1. Leave it empty to disable the wireless security; 2. Fill in the Key, and the encryption mode
will be WPA2-PSK/AES).
For detail setting, please go to the Wireless part in this Manual.
6.
Continue to set 5GHz wireless.
19216811.live