Page 81 / 308
Scroll up to view Page 76 - 80
76
7
. Set the VoIP parameters. First user should turn to a VoIP service provider to register a SIP
account, write down the registration information and fill it in the following blanks.
In this page, user can continue to add SIP account and configure dial plan, for more, please refer to
SIP Account
and
VoIP Plan
.
Page 82 / 308
77
3G/LTE
1.
Select
3G/LTE,
press
Continue
to go on to next step.
2.
Select the 3G mode,
and enter the APN, username, password from your ISP; and check with your
ISP with the authentication method setting.
3.
Wait while the device is configured.
4.
WAN port configuration is successful.
Page 83 / 308
78
5.
After the configuration is successful, click
Next to Wireless
button and you may proceed to
configure the Wireless setting. The device supports dual-band wireless connections, in Quick Start
part, users can only enable or disable the wireless on the band and the exact SSID and encryption
Key
(1. Leave it empty to disable the wireless security; 2. Fill in the Key, and the encryption mode
will be WPA2-PSK/AES).
For detail setting, please go to the Wireless part in this Manual.
6.
Continue to set 5GHz wireless.
Page 84 / 308
79
7
. Set the VoIP parameters. First user should turn to a VoIP service provider to register a SIP
account, write down the registration information and fill it in the following blanks.
In this page, user can continue to add SIP account and configure dial plan, for more, please refer to
SIP Account
and
VoIP Plan
.
Page 85 / 308
80
If Quick Start is finished, user can turn to Status > Summary to see the basic information.
19216811.live