Page 126 / 139
Scroll up to view Page 121 - 125
123
Step 3:
In the Communications window, select the Universal Plug and Play check box in the
Components selection box.
Step 4:
Click OK to go back to the Add/Remove Programs Properties window. Click Next.
Step 5:
Restart the computer when prompted.
Follow the steps below to install the UPnP in Windows XP.
Step 1:
Click Start and Control Panel.
Step 2:
Double-click Network Connections.
Step 3:
In the Network Connections window, click Advanced in the main menu and select
Optional Networking Components ….
The Windows Optional Networking Components Wizard window displays.
Page 127 / 139
124
Step 4:
Select Networking Service in the Components selection box and click Details.
Step 5:
In the Networking Services window, select the Universal Plug and Play check box.
Step 6:
Click
OK
to go back to the Windows Optional Networking Component Wizard
window and click
Next
.
Page 128 / 139
125
Auto-discover Your UPnP-enabled Network Device
Step 1:
Click start and Control Panel. Double-click Network Connections. An icon displays
under Internet Gateway.
Step 2:
Right-click the icon and select Properties.
Step 3:
In the Internet Connection Properties window, click Settings to see the port
mappings that were automatically created.
Page 129 / 139
126
Step 4:
You may edit or delete the port mappings or click Add to manually add port
mappings.
Step 5:
Select Show icon in notification area when connected option and click OK. An icon
displays in the system tray
Step 6:
Double-click on the icon to display your current Internet connection status.
Page 130 / 139
127
Web Configurator Easy Access
With UPnP, you can access web-based configuration for the BiPAC 7300W without first
finding out the IP address of the router. This helps if you do not know the router’s IP address.
Follow the steps below to access web configuration.
Step 1:
Click Start and then Control Panel.
Step 2:
Double-click Network Connections.
Step 3:
Select My Network Places under Other Places.
Step 4:
An icon describing each UPnP-enabled device shows under Local Network.
Step 5:
Right-click on the icon of your BiPAC 7300W and select Invoke. The web
configuration login screen displays.
Step 6:
Right-click on the icon of your BiPAC 7300W and select Properties. A properties
window displays basic information about the BiPAC 7300W.
19216811.live