Billion BiPAC 7300W Router Manual PDF (Setup & Configuration Guide)

Page 116 / 139 Scroll up to view Page 111 - 115

113

5.3.6.2 DMZ

DMZ:

The DMZ Host is a local computer exposed to the Internet. When setting a particular

internal IP address as the DMZ Host, all incoming packets are checked by the Firewall and

NAT algorithms, it is then passed to the DMZ host when a packet received does not use a

port number in use by any other Virtual Server entries.

Page 117 / 139

114

5.3.6.3 ALG

Controls enable or disable various protocols over application layer.

For example, SIP ALG:

Enable:

When SIP phone need ALG to pass through the NAT.

Disable:

When SIP phone included NAT-Traversal algorithm. Turn off the SIP ALG.

1. If you disable the NAT option in the WAN-ISP section, the Virtual

Server function becomes invalid.

2. If the DHCP server option is enabled, you have to be very careful in

assigning the IP addresses of the virtual servers in order to avoid

conflicts. The easiest way of configuring Virtual Servers is to manually

assign a static IP address to each virtual server PC, with an address

that does not fall into the range of IP addresses that are issued by the

DHCP server. You can configure the virtual server IP address

manually, but it must still be in the same subnet as the router.

Attention

Using port mapping does have security implications, since outside users

are able to connect to PCs on your network. For this reason you are

advised to use specific Virtual Server entries just for the ports your

application requires instead of simply using DMZ or creating a Virtual

Server entry for “All” protocols, as doing so results in all connection

attempts to your public IP address accessing the specified PC.

Page 118 / 139

115

5.3.7 Wake on LAN

This feature provides greater flexibility for users to turn on / boot the computer of the network

from a remotely site.

MAC Address: Enter the MAC address of the target computer or you can select the MAC

address directly from the Select drop down menu on the right.

: You can select the MAC from this list.

Page 119 / 139

116

5.3.8 Time Schedule

The Time Schedule supports up to 16 time slots which helps you to manage your Internet

connection. In each time profile, you may schedule specific day(s) i.e. Monday through

Sunday to restrict or allowing the usage of the Internet by users or applications.

This Time Schedule correlates closely with router’s time, since router does not have a real

time clock on board; it uses the Simple Network Time Protocol (SNTP) to get the current

time from an SNTP server from the Internet. Refer to

Time Zone

for details. You router time

should correspond with your local time. If the time is not set correctly, your Time Schedule

will not function properly.

Name:

A user-define description to identify this time portfolio.

Day in a week:

The default is set from Sunday through Saturday. You may specify the

days for the schedule to be applied.

Start Time:

The default is set at 8:00 AM. You may specify the start time of the schedule.

End Time:

The default is set at 18:00 (6:00PM). You may specify the end time of the

schedule. Select the

Apply

button to apply your changes.

Page 120 / 139

117

5.3.9 Advanced

Configuration options within the

Advanced

section are for users who wish to take

advantage of the more advanced features of the router. Users who do not understand the

features should not attempt to reconfigure their router, unless advised to do so by support

staff.

There are seven items within the

Advanced

section:

Static Route, Static ARP, Dynamic

DNS, VLAN, Device Management, IGMP, SNMP Access Control

and

Remote Access.

Rate

Popular Billion Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share