Page 41 / 149
Scroll up to view Page 36 - 40
Chapter 3 - Commissioning
Introduction
BreezeMAX Si 4000 CPE
27
Operator Manual
Telephony - SIP Server, phone
number, authentication, enable
the phone
Optional
VoIP is disabled by defualt and should
be enabled by the operator
WiFi
Enabled by default
Table 3-1: Basic Parameters
Item
Default Value
Comment
Page 42 / 149
Chapter 3 - Commissioning
Configuring the CPE Using the Web Management Interface
BreezeMAX Si 4000 CPE
28
Operator Manual
3.2
Configuring the CPE Using the Web
Management Interface
The BreezeMAX Si 4000 supports multi-user permissions: Operator and
Subscriber modes are available by downloading different configuration files
(IPKGs) from the web and upgrading the unit. Each level has different permissions
to access various pages for configuration.
3.2.1
Accessing the Web Management Interface
mask 255.255.255.0. If your PC is set to have an IP address assigned by DHCP
(Dynamic Host Configuration Protocol), you can connect immediately to the web
management interface. Otherwise, you must first check if your PC’s IP address is
set on the same subnet as the BreezeMAX Si 4000 (that is, the PC’s IP address
starts with 192.168.254.x).
1
Open a web browser and enter the default IP address:
To log in:
Figure 3-1: Login Window
Page 43 / 149
Chapter 3 - Commissioning
Configuring the CPE Using the Web Management Interface
BreezeMAX Si 4000 CPE
29
Operator Manual
2
Enter the user name and password, and click
Login
.
The default credentials
are:
Username: subscriber
Password: alvarion
The Status - Device Status page is displayed.
The Web Management Interface consists of a number of menu links (to the left).
Clicking on each of them will display the configuration/status page for the
selected menu item, with the applicable content (configurable parameters/options
or status information) in the main area. Several pages include a page selection bar
at the top of the page, enabling selection between several pages related to the
same menu item. The displayed pages may vary depending on user privileges.
Use the Main Menu items and the specific sub-items in the menu-bar at the top of
the window to configure settings for the current operating mode. The menus and
configuration steps are described in the next chapters of this manual.
Figure 3-2: Main Window (Device Status)
Page Selection
bar
Main Menu
Page Main
Area
Page 44 / 149
Chapter 3 - Commissioning
Configuring the CPE Using the Web Management Interface
BreezeMAX Si 4000 CPE
30
Operator Manual
In Operator mode only, additional parameters are available in the Engineering
menu item, for more detailed configuration. The Engineering features are
available in a software package, and can only be activated after uploading it to the
system from the Status page See
“Software Status” on page 74
.
3.2.2
Applying Changes
There are common buttons that appear in most of the interface pages. Use these
buttons as follows:
Apply
- Click this button to save the changes you have made in each page of
the device system.
Undo
- Click this button to clear the input data in the specific window.
Reboot
- Click this button to restart your unit. The device returns to the last
applied settings.
Reconnect
- click this button to attempt reconnecting the device to the Base
Station. This step is normally not required, unless suspecting that connection
is problematic.
Page 45 / 149
Chapter 3 - Commissioning
Configuring the CPE Using the WiMAX Modem Application CD
BreezeMAX Si 4000 CPE
31
Operator Manual
3.3
Configuring the CPE Using the WiMAX
Modem Application CD
This section explains how to use the automatic configuration tool, delivered on a
CDROM with the unit, to automatically configure a CPE. This procedure is usually
performed by the subscriber.
1
From the CDROM supplied with the unit, run the CPE Auto Configuration
Tool:
CPEAutoConfigTool.exe
; The Installation Setup Wizard window is
displayed.
2
Click
Next
to continue; The Choose Your ISP window is displayed.
To configure the unit using the Auto-Configuration tool:
Figure 3-3: Installation Setup Wizard Window
19216811.live