Page 51 / 149
Scroll up to view Page 46 - 50
Chapter 3 - Commissioning
Creating a Default Configuration File
BreezeMAX Si 4000 CPE
37
Operator Manual
1
Create a new folder and copy the following files into it:
»
Generate_Provision_V1.8.rar
(provided on a CDROM)
»
The
*.tar
file created previously.
2
Extract the
Generate_Provision_V1.8.rar
and run the CPE Auto Configuration
Tool:
generate_provision_1.8.exe
; The Generate IPKG Tool window is displayed.
Figure 3-10: Engineering - Dev Config Page
To generate an ipk file:
Page 52 / 149
Chapter 3 - Commissioning
Creating a Default Configuration File
BreezeMAX Si 4000 CPE
38
Operator Manual
3
Click
Import
and select the
tar
file you created
previously.
4
Select the type of IPKG to generate:
»
For Internet Service Provider (ISP) - the package will override the default
configuration file.
»
For User - the package will update the local subscriber configuration file
only.
5
Click
Generate IPKG
and save the file as .*ipk file. A green circle
appears next
to “Generate result” at the end of the ipk generation process a green circle
appears next to “Generate result”.
6
Use the ipkg file to configure CPEs, and/or include it in a CDROM for the
subscriber.
Figure 3-11: Generate IPKG Tool
Figure 3-12: Generation Results
Page 53 / 149
Chapter 3 - Commissioning
Operation Verification
BreezeMAX Si 4000 CPE
39
Operator Manual
3.6
Operation Verification
To verify proper operation of the unit, examine the LED indicators on the front
panel.
To verify data connectivity, from the end-user's PC or from a portable PC
connected to the unit, ping a known device in the network, or connect to a known
internet site (e.g www.Alvarion.com). This site can be reached by clicking the
Alvarion logo on any page in the GUI.
Page 54 / 149
4
Chapter
Configuring Setup Parameters
Page 55 / 149
Chapter 4 - Configuring Setup Parameters
BreezeMAX Si 4000 CPE
41
Operator Manual
In This Chapter:
“Introduction” on page 42
“Setting Basic Parameters” on page 43
“Setting Password” on page 45
“Setting Device Time Zone” on page 46
“Setting Device Name” on page 48
“Restore to Factory Default Configuration” on page 49
19216811.live