1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. ZyWALL-USG50
    5. /
  5. 168
Page 836 / 944 Scroll up to view Page 831 - 835
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
836
name=%s,status=%s,TxP
kts=%u,
RxPkts=%u,Colli.=%u,T
xB/s=%u,
RxB/s=%u,UpTime=%s
This log is sent to the VRPT server to show the specified PPP/
Cellular interface’s statistics and uptime.
The arguments represent the interface name, interface
status, interface Tx packets, interface Rx packets, interface
collision packets, interface Tx Bytes/s, interface Rx Bytes/s,
and interface up time.
Interface %s has been
renamed from '%s' to
'%s'
The user-configurable name of the specified interface
(internal system name) has been renamed from one name to
another.
Table 275
Account Logs
LOG MESSAGE
DESCRIPTION
Account %s %s has been
deleted.
A user deleted an ISP account profile.
1st %s: profile type, 2nd %se: profile name.
Account %s %s has been
changed.
A user changed an ISP account profile’s options.
1st %s: profile type, 2nd %s: profile name.
Account %s %s has been
added.
A user added a new ISP account profile.
1st %s: profile type, 2nd %s: profile name.
Table 276
Port Grouping Logs
LOG MESSAGE
DESCRIPTION
Interface %s links up
because of changing
Port Group. Enable
DHCP client.
An administrator used port-grouping to assign a port to a
representative Interface and this representative interface is
set to DHCP client and only has one member. In this case the
DHCP client will be enabled. %s: interface name.
Interface %s links
down because of
changing Port Group.
Disable DHCP client.
An administrator used port-grouping to assign a port to a
representative interface and this representative interface is
set to DHCP client and has no members in its group. In this
case the
DHCP client will be disabled. %s: interface name.
Port Group on %s is
changed. Renew DHCP
client.
An administrator used port-grouping to assign a port to a
representative interface and this representative interface is
set to DHCP client and has more than one member in its
group. In this case the DHCP client will renew. %s: interface
name.
Port Grouping %s has
been changed.
An administrator configured port-grouping, %s: interface
name.
Table 274
Interface Logs (continued)
LOG MESSAGE
DESCRIPTION
Page 837 / 944
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
837
Table 277
Force Authentication Logs
LOG MESSAGE
DESCRIPTION
Force User
Authentication will be
enabled due to http
server is enabled.
Force user authentication will be turned on because HTTP
server was turned on.
Force User
Authentication will be
disabled due to http
server is disabled.
Force user authentication will be turned off because HTTP
server was turned off.
Force User
Authentication may not
work properly!
Table 278
File Manager Logs
LOG MESSAGE
DESCRIPTION
ERROR:#%s, %s
Apply configuration failed, this log will be what CLI command
is and what error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
WARNING:#%s, %s
Apply configuration failed, this log will be what
CLI command
is and what warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
ERROR:#%s, %s
Run script failed, this log will be what wrong CLI command is
and what error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
WARNING:#%s, %s
Run script failed, this log will be what wrong CLI command is
and what warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
Resetting system...
Before apply configuration file.
System resetted. Now
apply %s..
After the system reset, it started to apply the configuration
file.
%s is configuration file name.
Page 838 / 944
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
838
Running %s...
An administrator ran the listed shell script.
%s is script file name.
Going to rollback
previous running-
config.
Applying the configuration file failed and the ZyWALL is going
to roll back to the previous running-config.
Table 279
DHCP Logs
LOG MESSAGE
DESCRIPTION
Can't find any lease for
this client - %s, DHCP
pool full!
All of the IP addresses in the DHCP pool are already assigned
to DHCP clients, so there is no IP address to give to the listed
DHCP client.
DHCP server offered %s
to %s(%s)
The DHCP server feature gave the listed IP address to the
computer with the listed hostname and MAC address.
Requested %s from
%s(%s)
The ZyWALL received a DHCP request for the specified IP
address from the computer with the listed hostname and MAC
address.
No applicable lease found
for DHCP request - %s !
There is no matching DHCP lease for a DHCP client’s request
for the specified IP address.
DHCP released %s with
%s(%s)
A DHCP client released the specified IP address. The DHCP
client’s hostname and MAC address are listed.
Sending ACK to %s
The DHCP server feature received a DHCP client’s inform
packet and is sending an ACK to the client.
DHCP server assigned %s
to %s(%s)
The DHCP server feature assigned a client the IP address that
it requested. The DHCP client’s hostname and MAC address
are listed.
Table 280
E-mail Daily Report Logs
LOG MESSAGE
DESCRIPTION
Email Daily Report has
been activated.
The daily e-mail report function has been turned on. The
ZyWALL will e-mail a daily report about the selected items at
the scheduled time if the required settings are configured
correctly.
Email Daily Report has
been deactivated.
The daily e-mail report function has been turned off. The
ZyWALL will not e-mail daily reports.
Email daily report has
been sent
successfully.
The ZyWALL sent a daily e-mail report mail successfully.
Cannot resolve mail
server address %s.
The (listed) SMTP address configured for the daily e-mail
report function is incorrect.
Mail server
authentication failed.
The user name or password configured for authenticating
with the e-mail server is incorrect.
Table 278
File Manager Logs (continued)
LOG MESSAGE
DESCRIPTION
Page 839 / 944
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
839
Failed to send report.
Mail From address %s1
is inconsistent with
SMTP account %s2.
The user name and password configured for authenticating
with the e-mail server are correct, but the (listed) sender e-
mail address does not match the (listed) SMTP e-mail
account.
Failed to connect to
mail server %s.
The ZyWALL could not connect to the SMTP e-mail server
(%s). The address configured for the server may be incorrect
or there may be a problem with the ZyWALL’s or the server’s
network connection.
Table 281
IP-MAC Binding Logs
LOG MESSAGE
DESCRIPTION
Drop packet %s-
%u.%u.%u.%u-
%02X:%02X:%02X:%02
X:%02X:%02X
The IP-MAC binding feature dropped an Ethernet packet. The
interface the packet came in through and the sender’s IP
address and MAC address are also shown.
Cannot bind ip-mac from
dhcpd:
%s#%u.%u.%u.%u#%0
2X:%02X:%02X:%02X:
%02X:%02X.
The IP-MAC binding feature could not create an IP-MAC
binding hash table entry. The interface the packet came in
through, the sender’s IP address and MAC address, are also
shown along with the binding type (“s” for static or “d” for
dynamic).
Cannot remove ip-mac
binding from dhcpd:
%s#%u.%u.%u.%u#%0
2X:%02X:%02X:%02X:
%02X:%02X.
The IP-MAC binding feature could not delete an IP-MAC
binding hash table entry. The interface the packet came in
through, the sender’s IP address and MAC address, are also
shown along with the binding type (“s” for static or “d” for
dynamic).
Table 282
Auth. Policy Logs
LOG MESSAGE
DESCRIPTION
Auth. Policy featuer is
disabled.
The auth. policy feature is not enabled.
Auth. policy %d is
disabled.
The specified auth. policy rule is not activated.
System integrity
error!
The ZyWALL cannot get the auth. policy rule and related
operation index.
Get lock id has failed
Cannot get semaphore locked ID.
Lock buffer id has
failed
Cannot use the current semaphore related buffer.
The Auth. policy %d
has been changed
'EPS' value.
The EPS object of the specified Auth. policy has changed.
EPS' signature data of
Auth. policy %d has
been updated.
The EPS object used by the specified Auth. policy was updated.
Table 280
E-mail Daily Report Logs (continued)
LOG MESSAGE
DESCRIPTION
Page 840 / 944
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
840
Table 283
EPS Logs
LOG MESSAGE
DESCRIPTION
Windows service
pack check fail in
%s
The Windows service pack on a user’s computer did not match the
specified EPS object.
Windows auto
update check fail
in %s
The Windows automatic update setting on a user’s computer did
not match the specified EPS object.
Windows security
patch check fail
in %s
The Windows security patch on a user’s computer did not match
the specified EPS object.
Antivirus check
fail in %s
A user’s computer did not match the anti-virus software check in
the specified EPS object.
Personal firewall
check fail in %s
A user’s computer did not match the personal firewall software
check in the specified EPS object.
Windows registry
check fail in
%s
A user’s computer did not match the registry check in the
specified EPS object.
Trusted process
check fail in %s
A user’s computer did not match the user-defined trusted process
check in the specified EPS object.
Forbidden process
check fail in
%s
A user’s computer did not match the user-defined forbidden
process check in the specified EPS object.
Files information
check fail in %s
A user’s computer did not match the user-defined file information
check in the specified EPS object.
OS type check fail
in %s
A user’s computer did not match the OS type check in the
specified EPS object.
Windows version
check fail in %s
A user’s computer did not match the Windows version check in
the specified EPS object.
EPS checking
result is pass.
A user’s computer passed the EPS check.

Rate

4.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top