1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. ZyWALL-USG50
    5. /
  5. 164
Page 816 / 944 Scroll up to view Page 811 - 815
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
816
SNMP port has been
changed to port %s.
An administrator changed the port number for SNMP.
%s is port number assigned by user
SNMP port has been
changed to default
port.
An administrator changed the port number for SNMP back to
the default (161).
Console baud has been
changed to %s.
An administrator changed the console port baud rate.
%s is baud rate assigned by user
Console baud has been
reset to %d.
An administrator changed the console port baud rate back to
the default (115200).
%d is default baud rate
DHCP's DNS option:%s
has changed.
DHCP pool's DNS option support from WAN interface. If this
interface is unlink/disconnect or link/connect, this log will be
shown.
%s is interface name. The DNS option of DHCP pool has
retrieved from it
Set timezone to %s.
An administrator changed the time zone.
%s is time zone value
Set timezone to
default.
An administrator changed the time zone back to the default
(0).
Enable daylight
saving.
An administrator turned on daylight saving.
Disable daylight
saving.
An administrator turned off daylight saving.
DNS access control
rules have been
reached the maximum
number.
An administrator tried to add more than the maximum
number of DNS access control rules (64).
DNS access control
rule %u of DNS has
been appended.
An administrator added a new rule.
%u is rule number
DNS access control
rule %u has been
inserted.
An administrator inserted a new rule.
%u is rule number
DNS access control
rule %u has been
appended
An administrator appended a new rule.
%u is rule number
DNS access control
rule %u has been
modified
An administrator modified the rule %u.
%u is rule number
DNS access control
rule %u has been
deleted.
An administrator removed the rule %u.
%u is rule number
Table 267
Built-in Services Logs (continued)
LOG MESSAGE
DESCRIPTION
Page 817 / 944
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
817
DNS access control
rule %u has been moved
to %d.
An administrator moved the rule %u to index %d.
%u is previous index
%d variable is current index
The default record of
Zone Forwarder have
reached the maximum
number of 128 DNS
servers.
The default record DNS servers is more than 128.
Interface %s ping
check is successful.
Zone Forwarder adds
DNS servers in
records.
Ping check ok, add DNS servers in bind.
%s is interface name
Interface %s ping
check is failed. Zone
Forwarder removes DNS
servers in records.
Ping check failed, remove DNS servers from bind.
%s is interface name
Interface %s ping
check is disabled.
Zone Forwarder adds
DNS servers in
records.
Ping check disabled, add DNS servers in bind.
%s is interface name
Wizard apply DNS
server failed.
Wizard apply DNS server failed.
Wizard adds DNS server
%s failed because DNS
zone setting has
conflictd.
Wizard apply DNS server failed because DNS zone conflicted.
%s is the IP address of the DNS server
Wizard adds DNS server
%s failed because Zone
Forwarder numbers have
reached the maximum
number of 32.
Wizard apply DNS server fail because the device already has
the maximum number of DNS records configured.
%s is IP address of the DNS server.
Access control rules
of %s have reached the
maximum number of %u
The maximum number of allowable rules has been reached.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
%u is the maximum number of access control rules.
Access control rule %u
of %s was appended.
A new built-in service access control rule was appended.
%u is the index of the access control rule.
%s
is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
Access control rule %u
of %s was inserted.
An access control rule was inserted successfully.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
Table 267
Built-in Services Logs (continued)
LOG MESSAGE
DESCRIPTION
Page 818 / 944
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
818
Access control rule %u
of %s was modified.
An access control rule was modified successfully.
%u is the index of the access control rule.
%s
is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
Access control rule %u
of %s was deleted.
An access control rule was removed successfully.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
Access control rule %d
of %s was moved to %d.
An access control rule was moved successfully.
1st %d is the previous index .
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
2nd %d is current previous index.
SNMP trap can not be
sent successfully
Cannot send a SNMP trap to a remote host due to network
error
Table 268
System Logs
LOG MESSAGE
DESCRIPTION
Port %d is up!!
When LINK is up, %d is the port number.
Port %d is down!!
When LINK is down, %d is the port number.
%s is dead at %s
A daemon (process) is gone (was killed by the operating
system).
1st %s: Daemon Name, 2nd %s: date and time
%s process count is
incorrect at %s
The count of the listed process is incorrect.
1st %s: Daemon Name, 2nd %s: date and time
%s becomes Zombie at
%s
A process is present but not functioning.
1st %s: Daemon Name, 2nd %s: date and time
When memory usage exceed threshold-max, memory usage
reaches %d%% :mem-threshold-max.
When local storage usage exceeds threshold-max, %s:
Partition name file system usage reaches %d%%: disk-
threshold-max.
When memory usage drops below threshold-min, System
Memory usage drops below the threshold of %d%%: mem-
threshold-min.
When local storage usage drops below threshold-min, %s:
partition_name file system drops below the threshold of
%d%%: disk-threshold-min.
DHCP Server executed
with cautious mode
enabled
DHCP Server executed with cautious mode enabled.
Table 267
Built-in Services Logs (continued)
LOG MESSAGE
DESCRIPTION
Page 819 / 944
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
819
DHCP Server executed
with cautious mode
disabled
DHCP Server executed with cautious mode disabled.
Received packet is not
an ARP response packet
A packet was received but it is not an ARP response packet.
Receive an ARP
response
The device received an ARP response.
Receive ARP response
from %s (%s)
The device received an ARP response from the listed source.
The request IP is: %s,
sent from %s
The device accepted a request.
Received ARP response
NOT for the request IP
address
The device received an ARP response that is NOT for the
requested IP address.
Receive an ARP
response from the
client issuing the
DHCP request
The device received an ARP response from the client issuing
the DHCP request.
Receive an ARP
response from an
unknown client
The device received an ARP response from an unknown client.
In total, received %d
arp response packets
for the requested IP
address
The device received the specified total number of ARP
response packets for the requested IP address.
Clear arp cache
successfully.
The ARP cache was cleared successfully.
Client MAC address is
not an Ethernet
address
A client MAC address is not an Ethernet address.
DHCP request received
via interface
%s (%s:%s), src_mac:
%s with requested IP:
%s
The device received a DHCP request through the specified
interface.
IP confliction is
detected. Send back
DHCP-NAK.
IP conflict was detected. Send back DHCP-NAK.
Clear ARP cache done
Clear ARP cache done.
Set manual time has
succeeded. Current
time is %s
The device date and time was changed manually.
%s is the date and time.
NTP update successful,
current time is %s
The device successfully synchronized with a NTP time server .
%s is the date and time.
NTP update failed
The device was not able to synchronize with the NTP time
server successfully.
Table 268
System Logs (continued)
LOG MESSAGE
DESCRIPTION
Page 820 / 944
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
820
Device is rebooted by
administrator!
An administrator restarted the device.
Insufficient memory.
Cannot allocate system memory.
Connect to dyndns
server has failed.
Cannot connect to members.dyndns.org to update DDNS.
Update the profile %s
has failed because of
strange server
response.
Update profile failed because the response was strange, %s is
the profile name.
Update the profile %s
has succeeded because
the IP address of FQDN
%s was not changed.
Update profile succeeded, because the IP address of profile is
unchanged, %s is the profile name.
Update the profile %s
has succeeded.
Update profile succeeded, %s is the profile name.
Update the profile %s
has failed because the
FQDN %s is invalid.
Update profile failed because FQDN for the profile is invalid
for DynDNS, 1st %s is the profile name, 2nd %s is the FQDN
of the profile.
Update the profile %s
has failed because the
FQDN %s is malformed.
The FQDN format is malformed for DynDNS server, 1st %s is
the profile name, 2nd %s is the FQDN of the profile.
Update the profile %s
has failed because the
FQDN %s is not under
your control.
The owner of this FQDN is not the user, 1st %s is the profile
name, 2nd %s is the FQDN of the profile.
Update the profile %s
has failed because the
FQDN %s was blocked
for abuse.
The FQDN is blocked by DynDNS, 1st %s is the profile name,
2nd %s is the FQDN of the profile.
Update the profile %s
has failed because of
authentication fail.
Try to update profile, but failed, because of authentication
fail, %s is the profile name.
Update the profile %s
has failed because of
invalid system
parameters.
Some system parameters are invalid to update FQDN, %s is
the profile name.
Update the profile %s
has failed because the
FQDN %s was blocked.
The FQDN is blocked by DynDNS , 1st %s is the profile name,
2nd %s is the FQDN of the profile.
Update the profile %s
has failed because too
many or too few hosts
found.
%s is the profile name.
Update the profile %s
has failed because of
dyndns internal error
Update profile failed because of a dynsdns internal error, %s
is the profile name.
Table 268
System Logs (continued)
LOG MESSAGE
DESCRIPTION

Rate

4.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top