1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. ZyWALL-USG50
    5. /
  5. 165
Page 821 / 944 Scroll up to view Page 816 - 820
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
821
Update the profile %s
has failed because the
feature requested is
only available to
donators.
Update profile failed because the feature requested is only
available to donators, %s is the profile name.
Update the profile %s
has failed because of
error response.
Update profile failed because the response is incorrect, %s is
the profile name.
Update the profile %s
has failed because %s.
Update profile failed, and show the response message, 1st
%s is the profile name, 2nd %s is the reason.
Update the profile %s
has failed because of
unknown error.
Update profile failed because unknown error. Sometimes, the
force authentication will result in this error, 1st %s is the
profile name.
Update the profile %s
has failed because
Username was empty.
DDNS profile needs username, %s is the profile name.
Update the profile %s
has failed because
Password was empty.
DDNS profile needs password, %s is the profile name.
Update the profile %s
has failed because
Domain name was empty.
DDNS profile needs domain name, %s is the profile name.
Update the profile %s
has failed because
Custom IP was empty.
The DDNS profile's IP select type is custom, and a custom IP
was not defined, %s is the profile name.
Update the profile %s
has failed because WAN
interface was empty.
If the DDNS profile's IP select type is iface, it needs a WAN
iface, %s is the profile name.
Update the profile %s
has failed because WAN
interface was link-
down.
DDNS profile cannot be updated for WAN IP because WAN
iface is link-down, %s is the profile name.
Update the profile %s
has failed because WAN
interface was not
connected.
DDNS profile cannot be updated for WAN IP because WAN
iface is PPP and not connected, %s is the profile name.
Update the profile %s
has failed because IP
address of WAN
interface was empty.
DDNS profile cannot be updated because the IP of WAN iface
is 0.0.0.0, 1st %s is the profile name.
Update the profile %s
has failed because
ping-check of WAN
interface has failed.
DDNS profile cannot be updated because the ping-check for
WAN iface failed ,
%s is the profile name.
Disable DDNS has
succeeded.
Disable DDNS.
Enable DDNS has
succeeded.
Enable DDNS.
Table 268
System Logs (continued)
LOG MESSAGE
DESCRIPTION
Page 822 / 944
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
822
DDNS profile %s has
been renamed as %s.
Rename DDNS profile, 1st %s is the original profile name,
2nd %s is the new profile name.
DDNS profile %s has
been deleted.
Delete DDNS profile, %s is the profile name,
DDNS Initialization
has failed.
Initialize DDNS failed,
All DDNS profiles are
deleted
All DDNS profiles have been removed.
Collect Diagnostic
Information has failed
- Server did not
respond.
There was an error and the diagnostics were not completed.
Collect Diagnostic
Infomation has
succeeded.
The diagnostics scripts were executed successfully.
Port %d is up!!
The specified port has it’s link up.
Port %d is down!!
The specified port has it’s link down.
Release interface %s
failed for packet
capture.
Releasing of the specified interface’s usage count failed while
exiting the packet capture function.
Release address-
object %s failed for
packet capture.
Releasing of the specified address object‘s usage count failed
while exiting the packet capture function.
The interface %s is
inactive, packet
capture for this
interface will not
take effect.
The specified interface is not activated so the packet capture
for the interface will not take effect.
Directory
packet_trace not
existed. Create it
automatically.
The packet trace did not exist so the ZyWALL created it
automatically.
Directory debug not
existed! Create it
automatically.
A debug directory did not exist so the ZyWALL created it
automatically.
Table 269
Connectivity Check Logs
LOG MESSAGE
DESCRIPTION
Can't open link_up2
Cannot recover routing status which is link-down.
Can not open %s.pid
Cannot open connectivity check process ID file.
%s: interface name
Can not open %s.arg
Cannot open configuration file for connectivity check process.
%s: interface name
Table 268
System Logs (continued)
LOG MESSAGE
DESCRIPTION
Page 823 / 944
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
823
The connectivity-
check is activate for
%s interface
The link status of interface is still activate after check of
connectivity check process.
%s: interface name
The connectivity-
check is fail for %s
interface
The link status of interface
is fail after check of connectivity
check process.
%s: interface name
Can't get gateway IP
of %s interface
The connectivity check process can't get the gateway IP
address for the specified interface.
%s: interface name
Can't alloc memory
The connectivity check process can't get memory from OS.
Can't load %s module
The connectivity check process can't load module for check
link-status.
%s: the connectivity module, currently only ICMP available.
Can't handle 'isalive'
function of %s module
The connectivity check process can't execute 'isalive' function
from module for check link-status.
%s: the connectivity module, currently only ICMP available.
Create socket error
The connectivity check process can't get socket to send
packet.
Can't get IP address
of %s interface
The connectivity check process can't get IP address of
interface.
%s: interface name.
Can't get flags of %s
interface
The connectivity check process can't get interface
configuration.
%s: interface name
Can't get remote
address of %s
interface
The connectivity check process can't get remote address of
PPP interface
%s: interface name
Can't get NETMASK
address of %s
interface
The connectivity check process can't get netmask address of
interface.
%s: interface name
Can't get BROADCAST
address of %s
interface
The connectivity check process can't get broadcast address of
interface
%s: interface name
Can't use MULTICAST IP
for destination
The connectivity check process can't use multicast address to
check link-status.
The destination is
invalid, because
destination IP is
broadcast IP
The connectivity check process can't use broadcast address to
check link-status.
Table 269
Connectivity Check Logs (continued)
LOG MESSAGE
DESCRIPTION
Page 824 / 944
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
824
Can't get MAC address
of %s interface!
The connectivity check process can't get MAC address of
interface.
%s: interface name
To send ARP REQUEST
error!
The connectivity check process can't send ARP request
packet.
The %s routing status
seted to DEAD by
connectivity-check
The interface routing can't forward packet.
%s: interface name
The %s routing status
seted ACTIVATE by
connectivity-check
The interface routing can forward packet.
%s: interface name
The link status of %s
interface is inactive
The specified interface failed a connectivity check.
Table 270
Routing Protocol Logs
LOG MESSAGE
DESCRIPTION
RIP on all interfaces
have been stopped
Got the CLI command 'no router rip' to shut down RIP on all
interfaces
Invalid RIP md5
authentication
RIP md5 authentication has been set without setting md5
authentication id and key first
Invalid RIP text
authentication.
RIP text authentication has been set without setting
authentication key first
RIP on interface %s
has been activated.
RIP on interface %s has been activated. %s: Interface Name
RIP direction on
interface %s has been
changed to In-Only.
RIP direction on interface %s has been changed to In-Only.
%s: Interface Name
RIP direction on
interface %s has been
changed to Out-Only.
RIP direction on interface %s has been changed to Out-Only.
%s: Interface Name
RIP authentication
mode has been changed
to %s.
RIP authentication mode has been changed to text or md5.
RIP text
authentication key has
been changed.
RIP text authentication key has been changed.
RIP md5 authentication
id and key have been
changed.
RIP md5 authentication id and key have been changed.
RIP global version has
been changed to %s.
RIP global version has been changed to version 1 or 2.
RIP redistribute OSPF
routes has been
enabled.
RIP redistribute OSPF routes has been enabled.
Table 269
Connectivity Check Logs (continued)
LOG MESSAGE
DESCRIPTION
Page 825 / 944
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
825
RIP redistribute
static routes has been
enabled.
RIP redistribute static routes has been enabled.
RIP on interface %s
has been deactivated.
RIP on interface %s has been deactivated. %s: Interface
Name
RIP direction on
interface %s has been
changed to BiDir.
RIP direction on interface %s has been changed to BiDir. %s:
Interface Name
RIP authentication has
benn disabled.
RIP text or md5 authentication has been disabled.
RIP text
authentication key has
been deleted.
RIP text authentication key has been deleted.
RIP md5 authentication
id and key have been
deleted.
RIP md5 authentication id and key have been deleted.
RIP global version has
been deleted.
RIP global version has been deleted.
RIP redistribute OSPF
routes has been
disabled.
RIP redistribute OSPF routes has been disabled.
RIP redistribute
static routes has been
disabled.
RIP redistribute static routes has been disabled.
RIP v2-broadcast on
interface %s has been
enabled.
RIP v2-broadcast on interface %s has been enabled. %s:
Interface Name.
RIP send-version on
interface %s has been
changed to %s.
RIP send-version on interface %s has been changed to
version 1 or 2 or both 1 2. %s: Interface Name.
RIP receive-version on
interface %s has been
changed to %s.
RIP receive-version on interface %s has been changed to
version 1 or 2 or both 1 2. 2nd%s: Interface Name.
RIP send-version on
interface %s has been
reset to current
global version %s.
RIP send-version on interface %s has been reset to current
global version %s. 1st %s: Interface Name, 2nd %s: RIP
Version
RIP receive-version on
interface %s has been
reset to current
global version %s.
RIP receive-version on interface %s has been reset to current
global version %s. 1st %s: Interface Name, 2nd %s: RIP
RIP v2-broadcast on
interface %s has been
disabled.
RIP v2-broadcast on interface %s has been disabled. %s:
Interface Name
Area %s cannot be
removed. This area is
in use.
One or more interfaces are still using this area, so area %s
cannot be removed. %s: OSPF Area
Table 270
Routing Protocol Logs (continued)
LOG MESSAGE
DESCRIPTION

Rate

4.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top