1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. ZyWALL-USG50
    5. /
  5. 166
Page 826 / 944 Scroll up to view Page 821 - 825
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
826
Invalid OSPF %s
authentication of area
%s.
OSPF md5 or text authentication has been set without setting
md5 authentication id and key, or text authentication key
first.
Invalid OSPF virtual-
link %d md5
authentication of area
%s.
Virtual-link %s md5 authentication has been set without
setting md5 authentication id and key first. %s: Virtual-Link
ID
Invalid OSPF virtual-
link %s text
authentication of area
%s.
Virtual-link %s text authentication has been set without
setting text authentication key first. %s: Virtual-Link ID
Invalid OSPF virtual-
link %s authentication
of area %s.
Virtual-link %s authentication has been set to same-as-area
but the area has invalid authentication configuration. %s:
Virtual-Link ID
Invalid OSPF md5
authentication on
interface %s.
Invalid OSPF md5 authentication is set on interface %s. %s:
Interface Name
Invalid OSPF text
authentication on
interface %s.
Invalid OSPF text authentication is set on interface %s. %s:
Interface Name
Interface %s does not
belong to any OSPF
area.
Interface %s has been set OSPF authentication same-as-
area, however the interface does not belong to any OSPF
area. %s: Interface Name
Invalid OSPF
authentication of area
%s on interface %s.
Interface %s has been set OSPF authentication same-as-
area, however the area has invalid text authentication
configuration. %s: Interface Name
Table 271
NAT Logs
LOG MESSAGE
DESCRIPTION
The NAT range is full
The NAT mapping table is full.
%s FTP ALG has
succeeded.
The FTP Application Layer Gateway (ALG) has been turned on
or off.
%s: Enable or Disable
Extra signal port of
FTP ALG has been
modified.
Extra FTP ALG port has been changed.
Signal port of FTP ALG
has been modified.
Default
FTP ALG port has been changed.
%s H.323 ALG has
succeeded.
The H.323 ALG has been turned on or off. %s: Enable or
Disable
Extra signal port of
H.323 ALG has been
modified.
Extra H.323 ALG port has been changed.
Signal port of H.323
ALG has been modified.
Default H.323 ALG port has been changed.
Table 270
Routing Protocol Logs (continued)
LOG MESSAGE
DESCRIPTION
Page 827 / 944
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
827
%s SIP ALG has
succeeded.
The SIP ALG has been turned on or off. %s: Enable or Disable
Extra signal port of
SIP ALG has been
modified.
Extra SIP ALG port has been changed.
Signal port of SIP ALG
has been modified.
Default SIP ALG port has been changed.
Register SIP ALG extra
port=%d failed.
SIP ALG apply additional signal port failed.
%d: Port number
Register SIP ALG
signal port=%d failed.
SIP ALG apply signal port failed.
%d: Port number
Register H.323 ALG
extra port=%d failed.
H323 ALG apply additional signal port failed.
%d: Port number
Register H.323 ALG
signal port=%d failed.
H323 ALG apply signal port failed.
%d: Port number
Register FTP ALG extra
port=%d failed.
FTP ALG apply additional signal port failed.
%d: Port number
Register FTP ALG
signal port=%d failed.
FTP ALG apply signal port failed.
%d: Port number
Table 272
PKI Logs
LOG MESSAGE
DESCRIPTION
Generate
X509certifiate "%s"
successfully
The router created an X509 format certificate with the
specified name.
Generate X509
certificate "%s"
failed, errno %d
The router was not able to create an X509 format certificate
with the specified name. See
Table 273 on page 829
for
details about the error number.
Generate certificate
request "%s"
successfully
The router created a certificate request with the specified
name.
Generate certificate
request "%s" failed,
errno %d
The router was not able to create a certificate request with
the specified name. See
Table 273 on page 829
for details
about the error number.
Generate PKCS#12
certificate "%s"
successfully
The router created a PKCS#12 format certificate with the
specified name.
Generate PKCS#12
certificate "%s"
failed, errno %d
The router was not able to create anPKCS#12
format
certificate with the specified name. See
Table 273 on page
829
for details about the error number.
Table 271
NAT Logs (continued)
LOG MESSAGE
DESCRIPTION
Page 828 / 944
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
828
Prepare to import "%s"
into "My Certificate"
%s is the name of a certificate request.
Prepare to import "%s"
into Trusted
Certificate"
%s is the name of a certificate request.
CMP enrollment "%s"
successfully, CA "%s",
URL "%s"
The device used CMP to enroll a certificate. 1st %s is a
request name, 2nd %s is the CA name, 3rd %s is the URL .
CMP enrollment "%s"
failed, CA "%s", URL
"%s"
The device was unable to use CMP to enroll a certificate. 1st
%s is a request name, 2nd %s is the CA name, 3rd %s is the
URL
SCEP enrollment "%s"
successfully, CA "%s",
URL "%s"
The device used SCEP to enroll a certificate. 1st %s is a
request name, 2nd %s is the CA name, 3rd %s is the URL .
SCEP enrollment "%s"
failed, CA "%s", URL
"%s"
The device was unable to use SCEP to enroll a certificate. 1st
%s is a request name, 2nd %s is the CA name, 3rd %s is the
URL
Import X509
certificate "%s" into
My Certificate
successfully
The device imported a x509 format certificate into My
Certificates. %s is the certificate request name.
Import X509
certificate "%s" into
Trusted Certificate
successfully
The device imported a x509 format certificate into Trusted
Certificates. %s is the certificate request name.
Import PKCS#12
certificate "%s" into
"My Certificate"
successfully
The device imported a PKCS#12 format certificate into My
Certificates. %s is the certificate request name.
Import PKCS#7
certificate "%s" into
"My Certificate"
successfully
The device imported a PKCS#7 format certificate into My
Certificates. %s is the certificate request name.
Import PKCS#7
certificate "%s" into
"Trusted Certificate"
successfully
The device imported a PKCS#7 format certificate into Trusted
Certificates. %s is the certificate request name.
Decode imported
certificate "%s"
failed
The device was not able to decode an imported certificate. %s
is certificate the request name
Export PKCS#12
certificate "%s" from
"My Certificate"
successfully
The device exported a PKCS#12 format certificate from My
Certificates. %s is the certificate request name.
Export PKCS#12
certificate "%s" from
"My Certificate"
failed
The device was not able to export a PKCS#12 format
certificate from My Certificates. %s is the certificate request
name.
Table 272
PKI Logs (continued)
LOG MESSAGE
DESCRIPTION
Page 829 / 944
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
829
Export X509
certificate "%s" from
"My Certificate"
failed
The device was not able to export a x509 format certificate
from My Certificates. %s is the certificate request name.
Export X509
certificate "%s" from
"Trusted Certificate"
failed
The device was not able to export a x509 format certificate
from Trusted Certificates. %s is the certificate request name.
Export X509
certificate "%s" from
"My Certificate"
successfully
The device exported a x509 format certificate from My
Certificates. %s is the certificate request name.
Export X509
certificate "%s" from
"Trusted Certificate"
successfully
The device exported a x509 format certificate from Trusted
Certificates. %s is the certificate request name.
Export X509
certificate "%s" from
"My Certificate"
failed
The device was not able to export a x509 format certificate
from My Certificates. %s is the certificate request name.
Import PKCS#12
certificate "%s" with
incorrect password
An administrator used the wrong password when trying to
import a PKCS#12 format certificate. %s is the certificate
name.
Cert trusted: %s
%s is the subject.
Due to %d, cert not
trusted: %s
%d is an error number (see
Table 273 on page 829
), %s is
the certificate subject.
Table 273
Certificate Path Verification Failure Reason Codes
CODE
DESCRIPTION
1
Algorithm mismatch between the certificate and the search constraints.
2
Key usage mismatch between the certificate and the search constraints.
3
Certificate was not valid in the time interval.
4
(Not used)
5
Certificate is not valid.
6
Certificate signature was not verified correctly.
7
Certificate was revoked by a CRL.
8
Certificate was not added to the cache.
9
Certificate decoding failed.
10
Certificate was not found (anywhere).
11
Certificate chain looped (did not find trusted root).
12
Certificate contains critical extension that was not handled.
13
Certificate issuer was not valid (CA specific information missing).
14
(Not used)
Table 272
PKI Logs (continued)
LOG MESSAGE
DESCRIPTION
Page 830 / 944
Appendix A Log Descriptions
ZyWALL USG 50 User’s Guide
830
15
CRL is too old.
16
CRL is not valid.
17
CRL signature was not verified correctly.
18
CRL was not found (anywhere).
19
CRL was not added to the cache.
20
CRL decoding failed.
21
CRL is not currently valid, but in the future.
22
CRL contains duplicate serial numbers.
23
Time interval is not continuous.
24
Time information not available.
25
Database method failed due to timeout.
26
Database method failed.
27
Path was not verified.
28
Maximum path length reached.
Table 274
Interface Logs
LOG MESSAGE
DESCRIPTION
Interface %s has been
deleted.
An administrator deleted an interface. %s is the interface
name.
Create interface %s
has been failed.
When PPP can't running fail,
%s
: interface name.
Base interface %s is
disabled. Interface %s
is disabled now.
When user disable ethernet, vlan or bridge interface and this
interface is base interface of PPP or virtual interface. PPP and
virtual will disable too. 1st %s is interface name, 2nd %s is
interface.
Interface %s has been
changed.
An administrator changed an interface’s configuration.
%s
:
interface name.
Interface %s has been
added.
An administrator added a new interface.
%s
: interface name.
Interface %s is
enabled.
An administrator enabled an interface. %s: interface name.
Interface %s is
disabled.
An administrator disabled an interface. %s: interface name.
%s MTU > (%s MTU - 8),
%s may not work
correctly.
An administrator configured a PPP interface, PPP interface
MTU > (base interface MTU - 8), PPP interface may not run
correctly because PPP packets will be fragmented by base
interface and the peer will not receive correct PPP packets.
1st %s: PPP interface name, 2nd %s: ethernet interface
name.
Table 273
Certificate Path Verification Failure Reason Codes (continued)
CODE
DESCRIPTION

Rate

4.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top