Zyxel P-660HN-F1Z Router Manual PDF (Setup & Configuration Guide)

Page 336 / 421 Scroll up to view Page 331 - 335

Appendix A Setting up Your Computer’s IP Address

P-660HN-FxZ Series User’s Guide

333

Figure 207

Macintosh OS 8/9: Apple Menu

2

Select

Ethernet built-in

from the

Connect via

list.

Figure 208

Macintosh OS 8/9: TCP/IP

3

For dynamically assigned settings, select

Using DHCP Server

from the

Configure:

list.

4

For statically assigned settings, do the following:

•

From the

Configure

box, select

Manually

.

Page 337 / 421

Appendix A Setting up Your Computer’s IP Address

P-660HN-FxZ Series User’s Guide

334

•

Type your IP address in the

IP Address

box.

•

Type your subnet mask in the

Subnet mask

box.

•

Type the IP address of your ZyXEL Device in the

Router address

box.

5

Close the

TCP/IP Control Panel

.

6

Click

Save

if prompted, to save changes to your configuration.

7

Turn on your ZyXEL Device and restart your computer (if prompted).

Verifying Settings

Check your TCP/IP properties in the

TCP/IP Control Panel

window.

Macintosh OS X

1

Click the

Apple

menu, and click

System Preferences

to open the

System Preferences

window.

Figure 209

Macintosh OS X: Apple Menu

2

Click

Network

in the icon bar.

• Select

Automatic

from the

Location

list.

• Select

Built-in Ethernet

from the

Show

list.

•

Click the

TCP/IP

tab.

3

For dynamically assigned settings, select

Using DHCP

from the

Configure

list.

Page 338 / 421

Appendix A Setting up Your Computer’s IP Address

P-660HN-FxZ Series User’s Guide

335

Figure 210

Macintosh OS X: Network

4

For statically assigned settings, do the following:

•

From the

Configure

box, select

Manually

.

•

Type your IP address in the

IP Address

box.

•

Type your subnet mask in the

Subnet mask

box.

•

Type the IP address of your ZyXEL Device in the

Router address

box.

5

Click

Apply Now

and close the window.

6

Turn on your ZyXEL Device and restart your computer (if prompted).

Verifying Settings

Check your TCP/IP properties in the

Network

window.

Linux

This section shows you how to configure your computer’s TCP/IP settings in Red Hat Linux

9.0. Procedure, screens and file location may vary depending on your Linux distribution and

release version.

Page 339 / 421

Appendix A Setting up Your Computer’s IP Address

P-660HN-FxZ Series User’s Guide

336

"

Make sure you are logged in as the root administrator.

Using the K Desktop Environment (KDE)

Follow the steps below to configure your computer IP address using the KDE.

1

Click the Red Hat button (located on the bottom left corner), select

System Setting

and

click

Network

.

Figure 211

Red Hat 9.0: KDE: Network Configuration: Devices

2

Double-click on the profile of the network card you wish to configure. The

Ethernet

Device General

screen displays as shown.

Figure 212

Red Hat 9.0: KDE: Ethernet Device: General

Page 340 / 421

Appendix A Setting up Your Computer’s IP Address

P-660HN-FxZ Series User’s Guide

337

•

If you have a dynamic IP address, click

Automatically obtain IP address settings

with

and select

dhcp

from the drop down list.

•

If you have a static IP address, click

Statically set IP Addresses

and fill in the

Address

,

Subnet mask

, and

Default Gateway Address

fields.

3

Click

OK

to save the changes and close the

Ethernet Device General

screen.

4

If you know your DNS server IP address(es), click the

DNS

tab in the

Network

Configuration

screen. Enter the DNS server information in the fields provided.

Figure 213

Red Hat 9.0: KDE: Network Configuration: DNS

5

Click the

Devices

tab.

6

Click the

Activate

button to apply the changes. The following screen displays. Click

Yes

to save the changes in all screens.

Figure 214

Red Hat 9.0: KDE: Network Configuration: Activate

7

After the network card restart process is complete, make sure the

Status

is

Active

in the

Network Configuration

screen.

Using Configuration Files

Follow the steps below to edit the network configuration files and set your computer IP

address.

1

Assuming that you have only one network card on the computer, locate the

ifconfig-

eth0

configuration file (where

eth0

is the name of the Ethernet card). Open the

configuration file with any plain text editor.

•

If you have a dynamic IP address, enter

dhcp

in the

BOOTPROTO=

field.

The

following figure shows an example.

Rate

Popular Zyxel Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share