Page 321 / 421
Scroll up to view Page 316 - 320
Page 322 / 421
P-660HN-FxZ Series User’s Guide
319
A
PPENDIX
A
Setting up Your Computer’s IP
Address
All computers must have a 10M or 100M Ethernet adapter card and TCP/IP installed.
Windows 95/98/Me/NT/2000/XP/Vista, Macintosh OS 7 and later operating systems and all
versions of UNIX/LINUX include the software components you need to install and use TCP/
IP on your computer. Windows 3.1 requires the purchase of a third-party TCP/IP application
package.
TCP/IP should already be installed on computers using Windows NT/2000/XP, Macintosh OS
7 and later operating systems.
After the appropriate TCP/IP components are installed, configure the TCP/IP settings in order
to "communicate" with your network.
If you manually assign IP information instead of using dynamic assignment, make sure that
your computers have IP addresses that place them in the same subnet as the ZyXEL Device’s
LAN port.
Windows 95/98/Me
Click
Start
,
Settings
,
Control Panel
and double-click the
Network
icon to open the
Network
window.
Page 323 / 421
Appendix A Setting up Your Computer’s IP Address
P-660HN-FxZ Series User’s Guide
320
Figure 188
WIndows 95/98/Me: Network: Configuration
Installing Components
The
Network
window
Configuration
tab displays a list of installed components. You need a
network adapter, the TCP/IP protocol and Client for Microsoft Networks.
If you need the adapter:
1
In the
Network
window, click
Add
.
2
Select
Adapter
and then click
Add
.
3
Select the manufacturer and model of your network adapter and then click
OK
.
If you need TCP/IP:
1
In the
Network
window, click
Add
.
2
Select
Protocol
and then click
Add
.
3
Select
Microsoft
from the list of
manufacturers
.
4
Select
TCP/IP
from the list of network protocols and then click
OK
.
If you need Client for Microsoft Networks:
1
Click
Add
.
2
Select
Client
and then click
Add
.
3
Select
Microsoft
from the list of manufacturers.
4
Select
Client for Microsoft Networks
from the list of network clients and then click
OK
.
5
Restart your computer so the changes you made take effect.
Page 324 / 421
Appendix A Setting up Your Computer’s IP Address
P-660HN-FxZ Series User’s Guide
321
Configuring
1
In the
Network
window
Configuration
tab, select your network adapter's TCP/IP entry
and click
Properties
2
Click the
IP Address
tab.
•
If your IP address is dynamic, select
Obtain an IP address automatically
.
•
If you have a static IP address, select
Specify an IP address
and type your
information into the
IP Address
and
Subnet Mask
fields.
Figure 189
Windows 95/98/Me: TCP/IP Properties: IP Address
3
Click the
DNS
Configuration tab.
•
If you do not know your DNS information, select
Disable DNS
.
•
If you know your DNS information, select
Enable DNS
and type the information in
the fields below (you may not need to fill them all in).
Page 325 / 421
Appendix A Setting up Your Computer’s IP Address
P-660HN-FxZ Series User’s Guide
322
Figure 190
Windows 95/98/Me: TCP/IP Properties: DNS Configuration
4
Click the
Gateway
tab.
•
If you do not know your gateway’s IP address, remove previously installed gateways.
•
If you have a gateway IP address, type it in the
New gateway field
and click
Add
.
5
Click
OK
to save and close the
TCP/IP Properties
window.
6
Click
OK
to close the
Network
window. Insert the Windows CD if prompted.
7
Turn on your ZyXEL Device and restart your computer when prompted.
Verifying Settings
1
Click
Start
and then
Run
.
2
In the
Run
window, type "winipcfg" and then click
OK
to open the
IP Configuration
window.
3
Select your network adapter. You should see your computer's IP address, subnet mask
and default gateway.
Windows 2000/NT/XP
The following example figures use the default Windows XP GUI theme.
1
Click
start
(
Start
in Windows 2000/NT),
Settings
,
Control Panel
.
19216811.live