Page 326 / 421
Scroll up to view Page 321 - 325
Appendix A Setting up Your Computer’s IP Address
P-660HN-FxZ Series User’s Guide
323
Figure 191
Windows XP: Start Menu
2
In the
Control Panel
, double-click
Network Connections
(
Network and Dial-up
Connections
in Windows 2000/NT).
Figure 192
Windows XP: Control Panel
3
Right-click
Local Area Connection
and then click
Properties
.
Page 327 / 421
Appendix A Setting up Your Computer’s IP Address
P-660HN-FxZ Series User’s Guide
324
Figure 193
Windows XP: Control Panel: Network Connections: Properties
4
Select
Internet Protocol (TCP/IP)
(under the
General
tab in Win XP) and then click
Properties
.
Figure 194
Windows XP: Local Area Connection Properties
5
The
Internet Protocol TCP/IP Properties
window opens (the
General tab
in
Windows XP).
•
If you have a dynamic IP address click
Obtain an IP address automatically
.
•
If you have a static IP address click
Use the following IP Address
and fill in the
IP
address
,
Subnet mask
, and
Default gateway
fields.
• Click
Advanced
.
Page 328 / 421
Appendix A Setting up Your Computer’s IP Address
P-660HN-FxZ Series User’s Guide
325
Figure 195
Windows XP: Internet Protocol (TCP/IP) Properties
6
If you do not know your gateway's IP address, remove any previously installed
gateways in the
IP Settings
tab and click
OK
.
Do one or more of the following if you want to configure additional IP addresses:
•
In the
IP Settings
tab, in IP addresses, click
Add
.
• In
TCP/IP Address
, type an IP address in
IP address
and a subnet mask in
Subnet
mask
, and then click
Add
.
•
Repeat the above two steps for each IP address you want to add.
•
Configure additional default gateways in the
IP Settings
tab by clicking
Add
in
Default gateways
.
• In
TCP/IP Gateway Address
, type the IP address of the default gateway in
Gateway
.
To manually configure a default metric (the number of transmission hops), clear the
Automatic metric
check box and type a metric in
Metric
.
• Click
Add
.
•
Repeat the previous three steps for each default gateway you want to add.
• Click
OK
when finished.
Page 329 / 421
Appendix A Setting up Your Computer’s IP Address
P-660HN-FxZ Series User’s Guide
326
Figure 196
Windows XP: Advanced TCP/IP Properties
7
In the
Internet Protocol TCP/IP Properties
window (the
General
tab in Windows
XP):
• Click
Obtain DNS server address automatically
if you do not know your DNS
server IP address(es).
•
If you know your DNS server IP address(es), click
Use the following DNS server
addresses
, and type them in the
Preferred DNS
server
and
Alternate DNS server
fields.
If you have previously configured DNS servers, click
Advanced
and then the
DNS
tab to order them.
Page 330 / 421
Appendix A Setting up Your Computer’s IP Address
P-660HN-FxZ Series User’s Guide
327
Figure 197
Windows XP: Internet Protocol (TCP/IP) Properties
8
Click
OK
to close the
Internet Protocol (TCP/IP) Properties
window.
9
Click
Close
(
OK
in Windows 2000/NT) to close the
Local Area Connection
Properties
window.
10
Close the
Network Connections
window (
Network and Dial-up Connections
in
Windows 2000/NT).
11
Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
1
Click
Start
,
All Programs
,
Accessories
and then
Command Prompt
.
2
In the
Command Prompt
window, type "ipconfig" and then press [ENTER]. You can
also open
Network Connections
, right-click a network connection, click
Status
and
then click the
Support
tab.
Windows Vista
This section shows screens from Windows Vista Enterprise Version 6.0.
1
Click the
Start
icon,
Control Panel
.
19216811.live