19216811.liveP-2602H(W)(L)-DxA Series User’s Guide
176
Chapter 11 Voice
11.20
PSTN Line Screen
(“L” models only)
Use this screen to set up the PSTN line you use to make regular phone calls. To access this
screen, click
VoIP > PSTN Line > General
.
Advanced Setup
The ZyXEL Device checks these rules before it checks the rules in the
Forward to
Number
section.
#
This field is a sequential value, and it is not associated with a specific rule. The
sequence is important, however. The ZyXEL Device checks each rule in order, and
it only follows the first one that applies.
Activate
Select this to enable this rule. Clear this to disable this rule.
Incoming Call
Number
Enter the phone number to which this rule applies.
Forward to
Number
Enter the phone number to which you want to forward incoming calls from the
Incoming Call Number
. You may leave this field blank, depending on the
Condition
.
Condition
Select the situations in which you want to forward incoming calls from the
Incoming Call Number
, or select an alternative action.
Unconditional
- The ZyXEL Device immediately forwards any calls from the
Incoming Call Number
to the
Forward to Number
.
Busy -
The ZyXEL Device forwards any calls from the
Incoming Call Number
to
the
Forward to Number
when your SIP account already has a call connected.
No Answer -
The ZyXEL Device forwards any calls from the
Incoming Call
Number
to the
Forward to Number
when the call is unanswered. (See
No
Answer Waiting Time
.)
Block -
The ZyXEL Device rejects calls from the
Incoming Call Number
.
Accept -
The ZyXEL Device allows calls from the
Incoming Call Number
. You
might create a rule with this condition if you do not want incoming calls from
someone to be forwarded by rules in the
Forward to Number
section.
Apply
Click this to save your changes and to apply them to the ZyXEL Device.
Cancel
Click this to set every field in this screen to its last-saved value.
Table 64
Phone Book > Incoming Call Policy
LABEL
DESCRIPTION