1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. EMG2926-Q10A
    5. /
  5. 6
Page 26 / 236 Scroll up to view Page 21 - 25
Chapter 4 Router Mode
EMG2926-Q10A User’s Guide
26
4.2.1
Navigation Panel
Use the sub-menus on the navigation panel to configure EMG2926-Q10A features.
Channel
This shows the channel number which you select manually.
Security
This shows the level of wireless security the EMG2926-Q10A is using.
Firewall
This shows whether the firewall is enabled or not.
Summary
Packet Statistics
Click
Details...
to go to the
Monitor > Packet Statistics
screen (
Section 7.5 on page 52
).
Use this screen to view port status and packet specific statistics.
WLAN 2.4G Station
Status
Click
Details...
to go to the
Monitor > WLAN 2.4G Station Status
screen (
Section 7.6 on
page 53
). Use this screen to view the wireless stations that are currently associated to the
EMG2926-Q10A’s 2.4GHz wireless LAN.
WLAN 5G Station Status
Click
Details...
to go to the
Monitor > WLAN 5G Station Status
screen (
Section 7.6 on
page 53
). Use this screen to view the wireless stations that are currently associated to the
EMG2926-Q10A’s 5GHz wireless LAN.
System Status
Item
This column shows the type of data the EMG2926-Q10A is recording.
Data
This column shows the actual data recorded by the EMG2926-Q10A.
System Up Time
This is the total time the EMG2926-Q10A has been on.
Current Date/Time
This field displays your EMG2926-Q10A’s present date and time.
System Resource
- CPU Usage
This displays what percentage of the EMG2926-Q10A’s processing ability is currently used.
When this percentage is close to 100%, the EMG2926-Q10A is running at full load, and the
throughput is not going to improve anymore. If you want some applications to have more
throughput, you should turn off other applications (for example, using bandwidth
management.)
- Memory Usage
This shows what percentage of the heap memory the EMG2926-Q10A is using.
Interface Status
Interface
This displays the EMG2926-Q10A port types. The port types are:
WAN
,
LAN
and
WLAN
.
Status
For the LAN and WAN ports, this field displays
Down
(line is down) or
Up
(line is up or
connected).
For the 2.4GHz/5GHz WLAN, it displays
Up
when the 2.4GHz/5GHz WLAN is enabled or
Down
when the 2.4G/5G WLAN is disabled.
Rate
For the LAN ports, this displays the port speed and duplex setting or
N/A
when the line is
disconnected.
For the WAN port, it displays the port speed and duplex setting if you’re using Ethernet
encapsulation. This field displays
N/A
when the line is disconnected.
For the 2.4GHz/5GHz WLAN, it displays the maximum transmission rate when the 2.4GHz/
5GHz WLAN is enabled and
N/A
when the WLAN is disabled.
Table 7
Status Screen: Router Mode (continued)
LABEL
DESCRIPTION
Page 27 / 236
Chapter 4 Router Mode
EMG2926-Q10A User’s Guide
27
Figure 11
Navigation Panel: Router Mode
The following table describes the sub-menus.
Table 8
Navigation Panel: Router Mode
LINK
TAB
FUNCTION
Status
This screen shows the EMG2926-Q10A’s general device, system and
interface status information. Use this screen to access the wizard, and
summary statistics tables.
MONITOR
Log
Use this screen to view the list of activities recorded by your EMG2926-
Q10A.
DHCP Table
Use this screen to view current DHCP client information.
Packet Statistics
Use this screen to view port status and packet specific statistics.
WLAN 2.4G
Station Status
Use this screen to view the wireless stations that are currently associated
to the EMG2926-Q10A’s 2.4GHz wireless LAN.
WLAN 5G
Station Status
Use this screen to view the wireless stations that are currently associated
to the EMG2926-Q10A’s 5GHz wireless LAN.
CONFIGURATION
Network
WAN
Internet
Connection
This screen allows you to configure ISP parameters, WAN IP address
assignment, DNS servers and the WAN MAC address.
Advanced
Use this screen to configure other advanced properties.
Page 28 / 236
Chapter 4 Router Mode
EMG2926-Q10A User’s Guide
28
Wireless LAN
2.4G/5G
General
Use this screen to enable the wireless LAN and configure wireless LAN and
wireless security settings.
More AP
Use this screen to configure multiple BSSs on the EMG2926-Q10A.
MAC Filter
Use the MAC filter screen to configure the EMG2926-Q10A to block access
to devices or block the devices from accessing the EMG2926-Q10A.
Advanced
This screen allows you to configure advanced wireless settings.
QoS
Use this screen to configure Wi-Fi Multimedia Quality of Service (WMM
QoS). WMM QoS allows you to prioritize wireless traffic according to the
delivery requirements of individual services.
WPS
Use this screen to configure WPS.
WPS Station
Use this screen to add a wireless station using WPS.
Scheduling
Use this screen to schedule the times the Wireless LAN is enabled.
LAN
IP
Use this screen to configure LAN IP address and subnet mask.
IP Alias
Use this screen to have the EMG2926-Q10A apply IP alias to create LAN
subnets.
IPv6 LAN
Use this screen to configure the IPv6 address for the EMG2926-Q10A on
the LAN.
DHCP Server
General
Use this screen to enable the EMG2926-Q10A’s DHCP server.
Advanced
Use this screen to assign IP addresses to specific individual computers
based on their MAC addresses and to have DNS servers assigned by the
DHCP server.
Client List
Use this screen to view information related to your DHCP status.
NAT
General
Use this screen to enable NAT.
Port
Forwarding
Use this screen to configure servers behind the EMG2926-Q10A and
forward incoming service requests to the server(s) on your local network.
Port Trigger
Use this screen to change your EMG2926-Q10A’s port triggering settings.
Dynamic
DNS
Dynamic DNS
Use this screen to set up dynamic DNS.
Static Route
Static Route
Use this screen to configure IP static routes.
Security
Firewall
General
Use this screen to activate/deactivate the firewall.
Services
This screen shows a summary of the firewall rules, and allows you to edit/
add a firewall rule.
Content
Filter
Content Filter
Use this screen to restrict web features and designate a trusted computer.
Parental
Control
Use this screen to block certain web features and sites containing certain
keywords in the URL.
IPv6 firewall
Services
Use this screen to configure IPv6 firewall rules.
Management
Table 8
Navigation Panel: Router Mode (continued)
LINK
TAB
FUNCTION
Page 29 / 236
Chapter 4 Router Mode
EMG2926-Q10A User’s Guide
29
Streamboost
Management
Bandwidth
Use this screen to configure the maximum allowable bandwidth and enable
automatic update.
Network
Use this screen to view transmission data rates between the EMG2926-
Q10A and the Internet or connected devices.
Priorities
Use this screen to change the priority of the connected devices.
Up Time
Use this screen to view the top five traffic flows transmitting from/to the
selected LAN device(s).
Downloads
Use this screen to view the type and percentage of most download traffic.
All Events
Use this screen to view the time at which a traffic flow is given bandwidth
for optimal, good or best-effort performance.
Remote
Management
WWW
Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the EMG2926-Q10A.
Telnet
Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet to manage the EMG2926-Q10A.
SNMP
Use this screen to configure the EMG2926-Q10A’s SNMP settings.
Wake On LAN
Use this screen to enable Wake on LAN to remotely turn on a device on the
local network.
TR069
Use this screen to configure the remote management over the WAN by an
Auto Configuration Server (ACS), and import certificates (digital IDs) to
authenticate users.
UPnP
UPnP
Use this screen to enable UPnP on the EMG2926-Q10A.
USB Media
Sharing
DLNA
Use this screen to have the EMG2926-Q10A function as a DLNA-compliant
media server, that lets DLNA-compliant media clients play video, audio, and
photo content files stored on the connected USB storage device.
SAMBA
Use this screen to enable file sharing through the EMG2926-Q10A.
FTP
Use this screen to have the EMG2926-Q10A act as a FTP server.
Port
Configuration
Use this screen to change the Ethernet port speed and duplex settings.
MAINTENANCE
General
General
Use this screen to view and change administrative settings such as system
and domain names.
Account
User Account
Use this screen to change the password of your EMG2926-Q10A.
Time
Time Setting
Use this screen to change your EMG2926-Q10A’s time and date.
Firmware
Upgrade
Use this screen to upload firmware to your EMG2926-Q10A.
Backup/
Restore
Use this screen to backup and restore the configuration or reset the factory
defaults to your EMG2926-Q10A.
Restart
System
Restart
This screen allows you to reboot the EMG2926-Q10A without turning the
power off.
Sys OP Mode
Sys OP Mode
This screen allows you to select whether your device acts as a router, or an
access point.
Language
Language
This screen allows you to select the language you prefer.
Diagnostic
Use this screen to ping an IP address.
Table 8
Navigation Panel: Router Mode (continued)
LINK
TAB
FUNCTION
Page 30 / 236
EMG2926-Q10A User’s Guide
30
C
HAPTER
5
Access Point Mode
5.1
Overview
Use your EMG2926-Q10A as an access point (AP) if you already have a router or gateway on your
network. In this mode your EMG2926-Q10A bridges a wired network (LAN) and wireless LAN
(WLAN) in the same subnet. See the figure below for an example.
Figure 12
Wireless Internet Access in Access Point Mode
Many screens that are available in
Router Mode
are not available in
Access Point Mode
, such as
bandwidth management and firewall.
5.2
What You Can Do
•
Use the
Status
screen to view read-only information about your EMG2926-Q10A (
Section 5.4 on
page 32
).
•
Use the
LAN
screen to set the IP address for your EMG2926-Q10A acting as an access point
(
Section 5.5 on page 34
).
5.3
What You Need to Know
See
Chapter 6 on page 37
for a tutorial on setting up a network with the EMG2926-Q10A as an
access point.

Rate

4 / 5 based on 1 vote.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top