Zyxel EMG2926-Q10A Router Manual PDF (Setup & Configuration Guide)

Page 21 / 236 Scroll up to view Page 16 - 20

Chapter 2 Introducing the Web Configurator

EMG2926-Q10A User’s Guide

21

The following table describes the labels in this screen.

Table 5

Change Weather

LABEL

DESCRIPTION

Change Unit

Choose which temperature unit you want the EMG2926-Q10A to display.

Change Location

Select the location for which you want to know the weather

.

If the city you want is not

listed, choose one that is closest to it.

Finish

Click this to apply the settings and refresh the date and time display.

Page 22 / 236

EMG2926-Q10A User’s Guide

22

C

HAPTER

3

EMG2926-Q10A Modes

3.1

Overview

This chapter introduces the operating mode of your EMG2926-Q10A, or simply how the EMG2926-

Q10A is being used in the network.

3.1.1

Device Modes

This refers to the operating mode of the EMG2926-Q10A, which can act as a:

•

Router

: This is the default device mode of the EMG2926-Q10A. Use this mode to connect the

local network to another network, like the Internet. Go to

Section 4.2 on page 23

to view the

Status

screen in this mode.

•

Access Point

: Use this mode if you want to extend your network by allowing network devices to

connect to the EMG2926-Q10A wirelessly. Go to

Section 5.4 on page 32

to view the

Status

screen in this mode.

For more information on these modes and to change the mode of your EMG2926-Q10A, refer to

Chapter 24 on page 172

.

Note: Choose your device mode carefully to avoid having to change it later.

When changing to another mode, the IP address of the EMG2926-Q10A changes. The running

applications and services of the network devices connected to the EMG2926-Q10A can be

interrupted.

Page 23 / 236

EMG2926-Q10A User’s Guide

23

C

HAPTER

4

Router Mode

4.1

Overview

The EMG2926-Q10A is set to router mode by default. Routers are used to connect the local network

to another network (for example, the Internet). In the figure below, the EMG2926-Q10A connects

the local network (

LAN1

~

LAN4

) to the Internet.

Figure 9

EMG2926-Q10A Network

4.2

Router Mode Status Screen

Click

to open the status screen.

Modem

Page 24 / 236

Chapter 4 Router Mode

EMG2926-Q10A User’s Guide

24

Figure 10

Status Screen: Router Mode

The following table describes the icons shown in the

Status

screen.

Table 6

Status Screen Icon Key

ICON

DESCRIPTION

Logout

Click this at any time to exit the Web Configurator.

Click this icon to view copyright and a link for related product information.

Select a number of seconds or

None

from the drop-down list box to refresh all screen statistics

automatically at the end of every time interval or to not refresh the screen statistics.

Page 25 / 236

Chapter 4 Router Mode

EMG2926-Q10A User’s Guide

25

The following table describes the labels shown in the

Status

screen.

Click this button to refresh the status screen statistics.

Click this icon to see the

Status

page. The information in this screen depends on the device

mode you select.

Click this icon to see the

Monitor

navigation menu.

Click this icon to see the

Configuration

navigation menu.

Click this icon to see the

Maintenance

navigation menu.

Table 6

Status Screen Icon Key (continued)

ICON

DESCRIPTION

Table 7

Status Screen: Router Mode

LABEL

DESCRIPTION

Device Information

Host Name

This is the

System Name

you enter in the

Maintenance

>

General

screen. It is for

identification purposes.

Model Number

This is the model name of your device.

Firmware Version

This is the firmware version and the date created.

Sys OP Mode

This is the device mode (

Section 3.1.1 on page 22

) to which the EMG2926-Q10A is set -

Router Mode

.

WAN Information

MAC Address

This shows the WAN Ethernet adapter MAC Address of your device.

IP Address

This shows the WAN port’s IP address.

IP Subnet Mask

This shows the WAN port’s subnet mask.

Default Gateway

This shows the WAN port’s gateway IP address.

IPv6 Address

This shows the IPv6 address of the EMG2926-Q10A on the WAN.

LAN Information

MAC Address

This shows the LAN Ethernet adapter MAC Address of your device.

IP Address

This shows the LAN port’s IP address.

IP Subnet Mask

This shows the LAN port’s subnet mask.

DHCP

This shows the LAN port’s DHCP role -

Server

or

Disable

.

IPv6 Address

This shows the IPv6 address of the EMG2926-Q10A on the LAN.

WLAN 2.4G Information

WLAN OP Mode

This is the device mode (

Section 3.1.1 on page 22

) to which the EMG2926-Q10A’s wireless

LAN is set -

Access Point Mode

.

MAC Address

This shows the 2.4GHz wireless adapter MAC Address of your device.

SSID

This shows a descriptive name used to identify the EMG2926-Q10A in the 2.4GHz wireless

LAN.

Channel

This shows the channel number which you select manually.

Security

This shows the level of wireless security the EMG2926-Q10A is using.

WLAN 5G Information

MAC Address

This shows the 5GHz wireless adapter MAC Address of your device.

SSID

This shows a descriptive name used to identify the EMG2926-Q10A in the 5GHz wireless

LAN.

Rate

Popular Zyxel Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share