Chapter 6 Tutorials

EMG2926-Q10A User’s Guide

46

11

Configure the screen as follows. You do not enable

Intra-BSS Traffic

for

SSID_VoIP

. Click

Apply

.

12

Click the

Edit

icon of the third entry to configure wireless and security settings for

SSID_Guest

.

13

Configure the screen as follows. In this example, you enable

Intra-BSS Traffic

for

SSID_Guest

to

allow wireless clients in the same wireless network to communicate with each other. Select

Enable

Guest WLAN

to allow clients to access the Internet only. Click

Apply

.

Chapter 6 Tutorials

EMG2926-Q10A User’s Guide

47

14

Click the

MAC Filter

tab to configure MAC filtering for the

SSID_VoIP

wireless network. Select

SSID_VoIP

from the

SSID Select

drop-down list, enable MAC address filtering and set the

Filter

Action

to

Allow

. Enter the VoIP device’s MAC address in the

Mac Address

field and click

Apply

to

allow only the VoIP device to associate with the EMG2926-Q10A using this SSID.

Chapter 6 Tutorials

EMG2926-Q10A User’s Guide

48

49

P

ART

II

Technical Reference

EMG2926-Q10A User’s Guide

50

C

HAPTER

7

Monitor

7.1

Overview

This chapter discusses read-only information related to the device state of the EMG2926-Q10A.

To access the Monitor screens, go to

Expert Mode

after login, then click

.

You can also click the links in the

Summary

table of the

Status

screen to view the packets sent/

received as well as the status of clients connected to the EMG2926-Q10A.

7.2

What You Can Do

•

Use the

Log

screen to see the logs for the activity on the EMG2926-Q10A (

Section 7.3 on page

50

).

•

Use the

DHCP Table

screen to view information related to your DHCP status (

Section 7.4 on

page 51

).

•

use the

Packet Statistics

screen to view port status, packet specific statistics, the "system up

time" and so on (

Section 7.5 on page 52

).

•

Use the

WLAN 2.4G/5G Station Status

screen to view the wireless stations that are currently

associated to the EMG2926-Q10A (

Section 7.6 on page 53

).

7.3

The Log Screen

The Web Configurator allows you to look at all of the EMG2926-Q10A’s logs in one location.

7.3.1

View Log

Use the

View Log

screen to see the logged messages for the EMG2926-Q10A. The log wraps

around and deletes the old entries after it fills. Select what logs you want to see from the

Display

drop list. The log choices depend on your settings in the

Log Setting

screen. Click

Refresh

to

renew the log screen. Click

Clear Log

to delete all the logs.