Page 26 / 320 Scroll up to view Page 21 - 25
Chapter 2 Introducing the Web Configurator
AMG1302/AMG1202-TSeries User’s Guide
26
Home
Networking
LAN Setup
Use this screen to configure LAN TCP/IP settings, and other
advanced properties.
Static DHCP
Use this screen to assign specific IP addresses to individual MAC
addresses.
IP Alias
Use this screen to partition your LAN interface into different logical
networks.
UPnP
Use this screen to enable the UPnP function.
IPv6 LAN Setup
Use this screen to configure the IPv6 settings on the AMG1302/
AMG1202-TSeries’s LAN interface.
Static Route
Static Route
Use this screen to view and set up static routes on the AMG1302/
AMG1202-TSeries.
IPv6 Static Route
Use this screen to configure IPv6 static routes.
QoS
General
Use this screen to enable QoS and decide allowable bandwidth
using QoS.
Queue
Use this screen to configure QoS queue assignment.
Class Setup
Use this screen to set up classifiers to sort traffic into different
flows and assign priority and define actions to be performed for a
classified traffic flow.
Game List
Use this screen to give priority to traffic for specific games.
NAT
General
Use this screen to activate/deactivate NAT.
Port Forwarding
Use this screen to make your local servers visible to the outside
world.
DMZ
Use this screen to configure a default server which receives
packets from ports that are not specified in the
Port Forwarding
screen.
Port Binding
General
Use this screen to activate/deactivate port binding.
Port Binding
Use this screen to configure and view port binding groups.
Dynamic DNS
Dynamic DNS
Use this screen to allow a static hostname alias for a dynamic IP
address.
Security
Filter
IP/MAC Filter
Use this screen to configure IPv4/MAC filtering rules for incoming
or outgoing traffic.
IPv6/MAC Filter
Use this screen to configure IPv6/MAC filtering rules for incoming
or outgoing traffic.
Firewall
General
Use this screen to activate/deactivate the firewall.
Default Action
Use this screen to set the default action that the firewall takes on
packets that do not match any of the firewall rules.
Rules
Use this screen to view the configured firewall rules and add, edit
or remove a firewall rule.
Dos
Use this screen to set the thresholds that the AMG1302/
AMG1202-TSeries uses to determine when to start dropping
sessions that are not fully established (half-open sessions).
Parental Control
Parental Control
Use this screen to define time periods and days during which the
AMG1302/AMG1202-TSeries performs parental control and/or
block web sites with the specific URL.
Table 2
Navigation Panel Summary
LINK
TAB
FUNCTION
Page 27 / 320
Chapter 2 Introducing the Web Configurator
AMG1302/AMG1202-TSeries User’s Guide
27
Certificates
Local Certificates
Use this screen to export self-signed certificates or certification
requests and import the AMG1302/AMG1202-TSeries’s CA-signed
certificates.
Trusted CA
Use this screen to save CA certificates to the AMG1302/AMG1202-
TSeries.
System Monitor
Log
Log
Use this screen to view the logs for the level that you selected.
You can export or e-mail the logs.
Traffic Status
WAN
Use this screen to view the status of all network traffic going
through the WAN port of the AMG1302/AMG1202-TSeries.
LAN
Use this screen to view the status of all network traffic going
through the LAN ports of the AMG1302/AMG1202-TSeries.
NAT
Use this screen to view the status of NAT sessions on the
AMG1302/AMG1202-TSeries.
Maintenance
Users Account
Users Account
Use this screen to configure the passwords your user accounts.
TR-069 Client
TR-069 Client
Use this screen to configure the AMG1302/AMG1202-TSeries to be
managed by an Auto Configuration Server (ACS).
System
System
Use this screen to configure management inactivity time-out
setting.
Time
Time Setting
Use this screen to change your AMG1302/AMG1202-TSeries’s time
and date.
Log Setting
Log Setting
Use this screen to select which logs and/or immediate alerts your
device is to record. You can also set it to e-mail the logs to you.
Firmware
Upgrade
Firmware Upgrade
Use this screen to upload firmware to your device.
Backup/Restore
Backup/Restore
Use this screen to backup and restore your device’s configuration
(settings) or reset the factory default settings.
Reboot
Reboot
Use this screen to reboot the AMG1302/AMG1202-TSeries without
turning the power off.
Remote MGMT
WWW, Telnet, FTP,
SNMP, DNS, ICMP,
SSH
Use this screen to enable specific traffic directions for specific
network service.
Diagnostic
Ping
Use this screen to test the connections to other devices.
DSL Line
Use this screen to identify problems with the DSL connection.
Table 2
Navigation Panel Summary
LINK
TAB
FUNCTION
Page 28 / 320
Chapter 2 Introducing the Web Configurator
AMG1302/AMG1202-TSeries User’s Guide
28
Page 29 / 320
AMG1302/AMG1202-TSeries User’s Guide
29
C
HAPTER
3
Internet / Wireless Setup Wizard
3.1
Overview
Use the wizard setup
screens to configure your system for Internet access with the
information given to you by your ISP.
Note: See the advanced menu chapters for background information on these fields.
3.2
Internet / Wireless Wizard Setup
1
After you enter the password to access the web configurator, click the Wizard icon (
) in
the top right corner of the web configurator
to go to the Wizard.
2
Click
INTERNET/WIRELESS SETUP
to configure the system for Internet access and
wireless connection.
Page 30 / 320
Chapter 3 Internet / Wireless Setup Wizard
AMG1302/AMG1202-TSeries User’s Guide
30
3
Select your
Time Zone
from the drop-down menu, and click
Next
.
Figure 8
Wizard Welcome
Enter your Internet access information in the wizard screen exactly as your service
provider gave it to you. Leave the defaults in any fields for which you were not given
information.
4
Configure the field and click
Next
to continue. See
Section 3.2 on page 29
for wireless
connection wizard setup.
Figure 9
Internet Access Wizard Setup: IPoA Configuration

Rate

3.7 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top