Page 256 / 320
Scroll up to view Page 251 - 255
Appendix A Setting up Your Computer’s IP Address
AMG1302/AMG1202-TSeries User’s Guide
256
Figure 144
Windows Vista: Advanced TCP/IP Properties
9
In the
Internet Protocol Version 4 (TCP/IPv4) Properties
window, (the
General tab
):
• Click
Obtain DNS server address automatically
if you do not know your DNS server IP
address(es).
•
If you know your DNS server IP address(es), click
Use the following DNS server
addresses
, and type them in the
Preferred DNS
server
and
Alternate DNS server
fields.
If you have previously configured DNS servers, click
Advanced
and then the
DNS
tab to order
them.
Page 257 / 320
Appendix A Setting up Your Computer’s IP Address
AMG1302/AMG1202-TSeries User’s Guide
257
Figure 145
Windows Vista: Internet Protocol Version 4 (TCP/IPv4) Properties
10
Click
OK
to close the
Internet Protocol Version 4 (TCP/IPv4) Properties
window.
11
Click
Close
to close the
Local Area Connection Properties
window.
12
Close the
Network Connections
window.
13
Turn on your AMG1302/AMG1202-TSeries and restart your computer (if prompted).
Verifying Settings
1
Click
Start
,
All Programs
,
Accessories
and then
Command Prompt
.
2
In the
Command Prompt
window, type "ipconfig" and then press [ENTER]. You can also open
Network Connections
, right-click a network connection, click
Status
and then click the
Support
tab.
Macintosh OS 8/9
1
Click the
Apple
menu,
Control Panel
and double-click
TCP/IP
to open the
TCP/IP Control
Panel
.
Page 258 / 320
Appendix A Setting up Your Computer’s IP Address
AMG1302/AMG1202-TSeries User’s Guide
258
Figure 146
Macintosh OS 8/9: Apple Menu
2
Select
Ethernet built-in
from the
Connect via
list.
Figure 147
Macintosh OS 8/9: TCP/IP
3
For dynamically assigned settings, select
Using DHCP Server
from the
Configure:
list.
4
For statically assigned settings, do the following:
Page 259 / 320
Appendix A Setting up Your Computer’s IP Address
AMG1302/AMG1202-TSeries User’s Guide
259
•
From the
Configure
box, select
Manually
.
•
Type your IP address in the
IP Address
box.
•
Type your subnet mask in the
Subnet mask
box.
•
Type the IP address of your AMG1302/AMG1202-TSeries in the
Router address
box.
5
Close the
TCP/IP Control Panel
.
6
Click
Save
if prompted, to save changes to your configuration.
7
Turn on your AMG1302/AMG1202-TSeries and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the
TCP/IP Control Panel
window.
Macintosh OS X
1
Click the
Apple
menu, and click
System Preferences
to open the
System Preferences
window.
Figure 148
Macintosh OS X: Apple Menu
2
Click
Network
in the icon bar.
• Select
Automatic
from the
Location
list.
• Select
Built-in Ethernet
from the
Show
list.
•
Click the
TCP/IP
tab.
3
For dynamically assigned settings, select
Using DHCP
from the
Configure
list.
Page 260 / 320
Appendix A Setting up Your Computer’s IP Address
AMG1302/AMG1202-TSeries User’s Guide
260
Figure 149
Macintosh OS X: Network
4
For statically assigned settings, do the following:
•
From the
Configure
box, select
Manually
.
•
Type your IP address in the
IP Address
box.
•
Type your subnet mask in the
Subnet mask
box.
•
Type the IP address of your AMG1302/AMG1202-TSeries in the
Router address
box.
5
Click
Apply Now
and close the window.
6
Turn on your AMG1302/AMG1202-TSeries and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the
Network
window.
Linux
This section shows you how to configure your computer’s TCP/IP settings in Red Hat Linux 9.0.
Procedure, screens and file location may vary depending on your Linux distribution and release
version.
Note: Make sure you are logged in as the root administrator.
19216811.live