Page 251 / 320
Scroll up to view Page 246 - 250
Appendix A Setting up Your Computer’s IP Address
AMG1302/AMG1202-TSeries User’s Guide
251
6
If you do not know your gateway's IP address, remove any previously installed gateways in the
IP
Settings
tab and click
OK
.
Do one or more of the following if you want to configure additional IP addresses:
•
In the
IP Settings
tab, in IP addresses, click
Add
.
• In
TCP/IP Address
, type an IP address in
IP address
and a subnet mask in
Subnet mask
,
and then click
Add
.
•
Repeat the above two steps for each IP address you want to add.
•
Configure additional default gateways in the
IP Settings
tab by clicking
Add
in
Default
gateways
.
• In
TCP/IP Gateway Address
, type the IP address of the default gateway in
Gateway
. To
manually configure a default metric (the number of transmission hops), clear the
Automatic
metric
check box and type a metric in
Metric
.
• Click
Add
.
•
Repeat the previous three steps for each default gateway you want to add.
• Click
OK
when finished.
Figure 135
Windows XP: Advanced TCP/IP Properties
7
In the
Internet Protocol TCP/IP Properties
window (the
General
tab in Windows XP):
• Click
Obtain DNS server address automatically
if you do not know your DNS server IP
address(es).
•
If you know your DNS server IP address(es), click
Use the following DNS server
addresses
, and type them in the
Preferred DNS
server
and
Alternate DNS server
fields.
If you have previously configured DNS servers, click
Advanced
and then the
DNS
tab to order
them.
Page 252 / 320
Appendix A Setting up Your Computer’s IP Address
AMG1302/AMG1202-TSeries User’s Guide
252
Figure 136
Windows XP: Internet Protocol (TCP/IP) Properties
8
Click
OK
to close the
Internet Protocol (TCP/IP) Properties
window.
9
Click
Close
(
OK
in Windows 2000/NT) to close the
Local Area Connection Properties
window.
10
Close the
Network Connections
window (
Network and Dial-up Connections
in Windows
2000/NT).
11
Turn on your AMG1302/AMG1202-TSeries and restart your computer (if prompted).
Verifying Settings
1
Click
Start
,
All Programs
,
Accessories
and then
Command Prompt
.
2
In the
Command Prompt
window, type "ipconfig" and then press [ENTER]. You can also open
Network Connections
, right-click a network connection, click
Status
and then click the
Support
tab.
Windows Vista
This section shows screens from Windows Vista Enterprise Version 6.0.
1
Click the
Start
icon,
Control Panel
.
Page 253 / 320
Appendix A Setting up Your Computer’s IP Address
AMG1302/AMG1202-TSeries User’s Guide
253
Figure 137
Windows Vista: Start Menu
2
In the
Control Panel
, double-click
Network and Internet
.
Figure 138
Windows Vista: Control Panel
3
Click
Network and Sharing Center
.
Figure 139
Windows Vista: Network And Internet
4
Click
Manage network connections
.
Figure 140
Windows Vista: Network and Sharing Center
Page 254 / 320
Appendix A Setting up Your Computer’s IP Address
AMG1302/AMG1202-TSeries User’s Guide
254
5
Right-click
Local Area Connection
and then click
Properties
.
Note: During this procedure, click
Continue
whenever Windows displays a screen saying
that it needs your permission to continue.
Figure 141
Windows Vista: Network and Sharing Center
6
Select
Internet Protocol Version 4 (TCP/IPv4)
and click
Properties
.
Figure 142
Windows Vista: Local Area Connection Properties
7
The
Internet Protocol Version 4 (TCP/IPv4) Properties
window opens (the
General tab
).
•
If you have a dynamic IP address click
Obtain an IP address automatically
.
Page 255 / 320
Appendix A Setting up Your Computer’s IP Address
AMG1302/AMG1202-TSeries User’s Guide
255
•
If you have a static IP address click
Use the following IP address
and fill in the
IP address
,
Subnet mask
, and
Default gateway
fields.
• Click
Advanced
.
Figure 143
Windows Vista: Internet Protocol Version 4 (TCP/IPv4) Properties
8
If you do not know your gateway's IP address, remove any previously installed gateways in the
IP
Settings
tab and click
OK
.
Do one or more of the following if you want to configure additional IP addresses:
•
In the
IP Settings
tab, in IP addresses, click
Add
.
• In
TCP/IP Address
, type an IP address in
IP address
and a subnet mask in
Subnet mask
,
and then click
Add
.
•
Repeat the above two steps for each IP address you want to add.
•
Configure additional default gateways in the
IP Settings
tab by clicking
Add
in
Default
gateways
.
• In
TCP/IP Gateway Address
, type the IP address of the default gateway in
Gateway
. To
manually configure a default metric (the number of transmission hops), clear the
Automatic
metric
check box and type a metric in
Metric
.
• Click
Add
.
•
Repeat the previous three steps for each default gateway you want to add.
• Click
OK
when finished.
19216811.live