Page 246 / 320
Scroll up to view Page 241 - 245
Appendix A Setting up Your Computer’s IP Address
AMG1302/AMG1202-TSeries User’s Guide
246
Installing Components
The
Network
window
Configuration
tab displays a list of installed components. You need a
network adapter, the TCP/IP protocol and Client for Microsoft Networks.
If you need the adapter:
1
In the
Network
window, click
Add
.
2
Select
Adapter
and then click
Add
.
3
Select the manufacturer and model of your network adapter and then click
OK
.
If you need TCP/IP:
1
In the
Network
window, click
Add
.
2
Select
Protocol
and then click
Add
.
3
Select
Microsoft
from the list of
manufacturers
.
4
Select
TCP/IP
from the list of network protocols and then click
OK
.
If you need Client for Microsoft Networks:
1
Click
Add
.
2
Select
Client
and then click
Add
.
3
Select
Microsoft
from the list of manufacturers.
4
Select
Client for Microsoft Networks
from the list of network clients and then click
OK
.
5
Restart your computer so the changes you made take effect.
Configuring
1
In the
Network
window
Configuration
tab, select your network adapter's TCP/IP entry and click
Properties
2
Click the
IP Address
tab.
•
If your IP address is dynamic, select
Obtain an IP address automatically
.
•
If you have a static IP address, select
Specify an IP address
and type your information into
the
IP Address
and
Subnet Mask
fields.
Page 247 / 320
Appendix A Setting up Your Computer’s IP Address
AMG1302/AMG1202-TSeries User’s Guide
247
Figure 128
Windows 95/98/Me: TCP/IP Properties: IP Address
3
Click the
DNS
Configuration tab.
•
If you do not know your DNS information, select
Disable DNS
.
•
If you know your DNS information, select
Enable DNS
and type the information in the fields
below (you may not need to fill them all in).
Figure 129
Windows 95/98/Me: TCP/IP Properties: DNS Configuration
4
Click the
Gateway
tab.
Page 248 / 320
Appendix A Setting up Your Computer’s IP Address
AMG1302/AMG1202-TSeries User’s Guide
248
•
If you do not know your gateway’s IP address, remove previously installed gateways.
•
If you have a gateway IP address, type it in the
New gateway field
and click
Add
.
5
Click
OK
to save and close the
TCP/IP Properties
window.
6
Click
OK
to close the
Network
window. Insert the Windows CD if prompted.
7
Turn on your AMG1302/AMG1202-TSeries and restart your computer when prompted.
Verifying Settings
1
Click
Start
and then
Run
.
2
In the
Run
window, type "winipcfg" and then click
OK
to open the
IP Configuration
window.
3
Select your network adapter. You should see your computer's IP address, subnet mask and default
gateway.
Windows 2000/NT/XP
The following example figures use the default Windows XP GUI theme.
1
Click
start
(
Start
in Windows 2000/NT),
Settings
,
Control Panel
.
Figure 130
Windows XP: Start Menu
2
In the
Control Panel
, double-click
Network Connections
(
Network and Dial-up Connections
in Windows 2000/NT).
Page 249 / 320
Appendix A Setting up Your Computer’s IP Address
AMG1302/AMG1202-TSeries User’s Guide
249
Figure 131
Windows XP: Control Panel
3
Right-click
Local Area Connection
and then click
Properties
.
Figure 132
Windows XP: Control Panel: Network Connections: Properties
4
Select
Internet Protocol (TCP/IP)
(under the
General
tab in Win XP) and then click
Properties
.
Page 250 / 320
Appendix A Setting up Your Computer’s IP Address
AMG1302/AMG1202-TSeries User’s Guide
250
Figure 133
Windows XP: Local Area Connection Properties
5
The
Internet Protocol TCP/IP Properties
window opens (the
General tab
in Windows XP).
•
If you have a dynamic IP address click
Obtain an IP address automatically
.
•
If you have a static IP address click
Use the following IP Address
and fill in the
IP address
,
Subnet mask
, and
Default gateway
fields.
• Click
Advanced
.
Figure 134
Windows XP: Internet Protocol (TCP/IP) Properties
19216811.live