Page 101 / 127
Scroll up to view Page 96 - 100
Chapter 4 Advanced Configuration
Parameter
Description
Start Time
Starting time of the period that the schedule is effective. This parameter
needs to be configured when
All Day
is not selected.
End Time
Ending time of the period that the schedule is effective. This parameter
needs to be configured when
All Day
is not selected.
3.
Click
Apply
.
4.
(Optional) To edit a schedule, select it and click
Edit
.
5.
(Optional) To delete a schedule, select it and click
Delete
.
– End of Steps –
4.15 Configuring NAT
This procedure describes how to configure Network Address Translation (
NAT
).
Context
NAT allows the hosts within a private network to transparently access the hosts in the
external network. Sessions are uni-directional and outbound from the private network.
Steps
1.
Select
Advanced > NAT
. The
NAT
page is displayed, see
Figure 4-55
.
Figure 4-55 NAT Page
4-55
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 102 / 127
ZXHN H108N Maintenance Management Manual
2.
Click
Add
. The
NAT SETTINGS
area is displayed, see
Figure 4-56
.
Figure 4-56 NAT SETTINGS Area
3.
Configure the NAT parameters.
4.
Click
Apply
.
5.
(Optional) To edit an NAT item, select it and click
Edit
.
6.
(Optional) To delete an NAT item, select it and click
Delete
.
– End of Steps –
4.16 Enabling DLNA
This procedure describes how to enable Digital Living Network Alliance (
DLNA
).
Steps
1.
Select
Advanced > DLNA
. The
DLNA
page is displayed, see
Figure 4-57
.
4-56
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 103 / 127
Chapter 4 Advanced Configuration
Figure 4-57 DLNA Page
2.
Select
Enable DLNA
.
3.
Click
Apply
.
– End of Steps –
4.17 IP Tunnel Configuration
4.17.1 Configuring the 4in6 Tunnel
This procedure describes how to configure the 4in6 Tunnel.
Steps
1.
Select
Advanced > IP Tunnel > 4in6 Tunnel
. The
IP TUNNEL CONFIGURATION
page is displayed, see
Figure 4-58
.
4-57
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 104 / 127
ZXHN H108N Maintenance Management Manual
Figure 4-58 IP TUNNEL CONFIGURATION Page
2.
Click
Add
below the
IPTunnel
table. The
ADD TUNNEL ITEMS
area is displayed,
see
Figure 4-59
.
Figure 4-59 ADD TUNNEL ITEMS Area
3.
Configure the tunnel parameters.
4.
Click
Apply
.
5.
Click
Add
below the
DS-Lite IPv4 over IPv6 Tunnel List
table. The
DS-LITE IPV4
OVER IPV6 TUNNEL LIST
area is displayed, see
Figure 4-60
.
4-58
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 105 / 127
Chapter 4 Advanced Configuration
Figure 4-60 DS-LITE IPV4 OVER IPV6 TUNNEL LIST Area
6.
Configure the parameters of the DS-Lite IPv4 over IPv6 tunnel.
7.
Click
Apply
.
8.
(Optional) Perform the following operation as required:
l
To delete a tunnel, click
Delete
below the
IPTunnel
table.
l
To edit a tunnel, click
Edit
below the
IPTunnel
table.
l
To delete a DS-Lite IPv4 over IPv6 tunnel, click
Delete
below the
DS-Lite IPv4
over IPv6 Tunnel List
table.
l
To edit a DS-Lite IPv4 over IPv6 tunnel, click
Edit
below the
DS-Lite IPv4 over
IPv6 Tunnel List
table.
– End of Steps –
4.17.2 Configuring the 6in4 Tunnel
This procedure describes how to configure the 6in4 tunnel.
Steps
1.
Select
Advanced > IP Tunnel > 6in4 Tunnel
. The
IP TUNNEL CONFIGURATION
page is displayed, see
Figure 4-61
.
4-59
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
19216811.live