Page 106 / 127
Scroll up to view Page 101 - 105
ZXHN H108N Maintenance Management Manual
Figure 4-61 IP TUNNEL CONFIGURATION Page
2.
Click
Add
below the
IPTunnel
table. The
ADD TUNNEL ITEMS
area is displayed,
see
Figure 4-62
.
Figure 4-62 ADD TUNNEL ITEMS Area
3.
Configure the tunnel parameters.
4.
Click
Apply
.
5.
Click
Add
below the
IPv6 Rapid Deployment
table. The
IPV6 RAPID DEPLOYMENT
LIST
area is displayed, see
Figure 4-63
.
4-60
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 107 / 127
Chapter 4 Advanced Configuration
Figure 4-63 IPV6 RAPID DEPLOYMENT LIST Area
6.
Configure the parameters of IPv6 rapid deployment.
7.
Click
Apply
.
8.
(Optional) Perform the following operation as required:
l
To delete a tunnel, click
Delete
below the
IPTunnel
table.
l
To edit a tunnel, click
Edit
below the
IPTunnel
table.
l
To delete an IPv6 rapid deployment item, click
Delete
below the
IPv6 Rapid
Deployment
table.
l
To edit an IPv6 rapid deployment item,
click
Edit
below the
IPv6 Rapid
Deployment
table.
– End of Steps –
4-61
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 108 / 127
ZXHN H108N Maintenance Management Manual
This page intentionally left blank.
4-62
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 109 / 127
Chapter 5
System Management and
Maintenance
Table of Contents
Enabling Global IPv6
..................................................................................................
5-1
Configuring System Management
...............................................................................
5-2
Updating the Firmware
...............................................................................................
5-3
Access Control Configuration
.....................................................................................
5-3
Diagnosis
...................................................................................................................
5-7
Configuring Logs
........................................................................................................
5-9
5.1 Enabling Global IPv6
This procedure describes how to enable global IPv6.
Steps
1.
Select
Management > Global IPv6
. The
GLOBAL IPV6 SETTING
page is displayed,
see
Figure 5-1
.
Figure 5-1 GLOBAL IPV6 SETTING Page
2.
Select
IPv6 Enable
.
3.
Click
Apply
.
– End of Steps –
5-1
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 110 / 127
ZXHN H108N Maintenance Management Manual
5.2 Configuring System Management
This
procedure
describes
how
to
reboot
the
ZXHN
H108N
device,
back
up
the
configuration file of the ZXHN H108N, upgrade the ZXHN H108N, and restore the factory
default settings.
Steps
1.
Select
Management > System Management
.
The
System Management
page is
displayed, see
Figure 5-2
.
Figure 5-2 System Management Page
2.
Perform the following operation as required:
l
To reboot the ZXHN H108N, click
Reboot
.
l
To back up the configuration file of the ZXHN H108N, click
Backup Setting
.
l
To upgrade the ZXHN H108N, click
Browse
to select a configuration file, and then
click
Update Setting
.
l
To restore the factory default settings, click
Restore Default Setting
.
– End of Steps –
5-2
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
19216811.live