Page 96 / 127
Scroll up to view Page 91 - 95
ZXHN H108N Maintenance Management Manual
Figure 4-48 POLICY ROUTE Page
2.
Click
Add
. The
WAN INSTANCE AND LAN INSTANCE
area is displayed, see
Figure
4-49
.
Figure 4-49 WAN INSTANCE AND LAN INSTANCE Area
Configure the policy route parameters. For a description of the parameters, refer to
Table 4-29
.
Table 4-29 Policy Route Parameter Descriptions
Parameter
Description
WAN Connection
WAN interface corresponding to the route
LAN Connection
LAN interface corresponding to the route
3.
Click
Apply
.
4.
(Optional) To delete a policy route, select it and click
Delete
.
– End of Steps –
4.13.4 Configuring the Default Gateway
This procedure describes how to configure the default gateway.
4-50
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 97 / 127
Chapter 4 Advanced Configuration
Steps
1.
Select
Advanced > Routing > Default Gateway
. The
DEFAULT GATEWAY
page is
displayed, see
Figure 4-50
.
Figure 4-50 DEFAULT GATEWAY Page
2.
From the
Assigned the Default Gateway
list, select the default IPv4 gateway. From
the
Assigned the IPv6 Default Gateway
list, select the default IPv6 gateway.
3.
Click
Apply
.
– End of Steps –
4.13.5 Configuring the RIP
This procedure describes how to configure the Routing Information Protocol (
RIP
).
Context
The RIP is a dynamic routing protocol based on the distance-vector algorithm, exchanging
routing information through User Datagram Protocol (
UDP
) packets. The RIP has its own
routing algorithm, and can automatically adapt to network topology changes. It has higher
requirements than the static routing, and occupies more network resources.
Steps
1.
Select
Advanced > Routing > RIP
. The
RIP CONFIGURATION
page is displayed,
see
Figure 4-51
.
4-51
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 98 / 127
ZXHN H108N Maintenance Management Manual
Figure 4-51 RIP CONFIGURATION Page
2.
In the
RIP
area, configure the RIP parameters. For a description of the parameters,
refer to
Table 4-30
.
Table 4-30 RIP Parameter Descriptions
Parameter
Description
Interface
WAN interface
VPI/VCI
VPI or VCI corresponding to the WAN interface
Version
RIP version
Operation
Operation status
3.
Click
Apply
.
– End of Steps –
4.13.6 Configuring the RIPng Protocol
This procedure describes how to configure the Routing Information Protocol next
generation (
RIPng
)
Steps
1.
Select
Advanced > Routing > RIPng
.
The
RIPNG CONFIGURATION
page is
displayed, see
Figure 4-52
.
4-52
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 99 / 127
Chapter 4 Advanced Configuration
Figure 4-52 RIPNG CONFIGURATION Page
2.
In the
RIPNG
list, select
Enable
.
3.
Click
Apply
.
– End of Steps –
4.14 Configuring Schedules
This procedure describes how to configure schedules, which can be used to create
scheduling rules.
Steps
1.
Select
Advanced > Schedules
.
The
SCHEDULES
page is displayed, see
Figure
4-53
.
4-53
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 100 / 127
ZXHN H108N Maintenance Management Manual
Figure 4-53 SCHEDULES Page
2.
Click
Add
. The
ADD SCHEDULE RULE
area is displayed, see
Figure 4-54
.
Figure 4-54 ADD SCHEDULE RULE Area
Configure the schedule parameters. For a description of the parameters, refer to
Table
4-31
.
Table 4-31 Schedule Parameter Descriptions
Parameter
Description
Name
Schedule name, such as
Weekday rule
.
Day(s)
Select the check boxes corresponding to the desired days or select
All
Week
to select the whole week.
All Day–24 hrs
The schedule takes effect for the whole day of the selected day(s).
4-54
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
19216811.live