ZTE ZXHN H108N Router Manual PDF (Setup & Configuration Guide)

Page 81 / 127 Scroll up to view Page 76 - 80

Chapter 4 Advanced Conﬁguration

Figure 4-32 ADD PORT MAPPING Area

3.

Click

Apply

.

4.

(Optional) To edit a port mapping item, select it and click

Edit

.

5.

(Optional) To delete a port mapping item, select it and click

Delete

.

– End of Steps –

4.12.2 Configuring IGMP Proxy

This procedure describes how to conﬁgure Internet Group Management Protocol (

IGMP

)

proxy.

Context

The ZXHN H108N supports IGMP packet processing through IGMP proxy.

Steps

1.

Select

Advanced > Network Tools > IGMP Proxy

.

The

IGMP PROXY

page is

displayed, see

Figure 4-33

.

4-35

SJ-20121120142951-001|2012-11-30 (R1.0)

ZTE Proprietary and Conﬁdential

Page 82 / 127

ZXHN H108N Maintenance Management Manual

Figure 4-33 IGMP PROXY Page

2.

Conﬁgure the IGMP proxy parameters. For a description of the parameters, refer to

Table 4-20

.

Table 4-20 IGMP Proxy Parameter Descriptions

Parameter

Description

Enable IGMP Proxy

Whether to enable IGMP proxy.

IGMP Version

IGMP version.

Port Binding

Port binding.

Enable PassThrough

By default, it is enabled.

Enable FastLeaving

By default, it is enabled.

General Query Interval

By default, it is 150 seconds.

General Query Response Interval

By default, it is 20 ms.

Group Query Interval

By default, it is 325 seconds.

Group Query Response Interval

By default, it is 20 ms.

Group Query Count

By default, it is 3.

Last Member Query Interval

By default, it is 1 second.

4-36

SJ-20121120142951-001|2012-11-30 (R1.0)

ZTE Proprietary and Conﬁdential

Page 83 / 127

Chapter 4 Advanced Conﬁguration

Parameter

Description

Last Member Query Count

By default, it is 1 second.

3.

Click

Apply

.

– End of Steps –

4.12.3 Configuring IGMP Snooping

This procedure describes how to conﬁgure IGMP snooping.

Steps

1.

Select

Advanced > Network Tools > IGMP Snooping

. The

IGMP

page is displayed,

see

Figure 4-34

.

Figure 4-34 IGMP Page

2.

Conﬁgure the IGMP snooping parameters. For a description of the parameters, refer

to

Table 4-21

.

Table 4-21 IGMP Snooping Parameter Descriptions

Parameter

Description

Enabled

Whether to enable IGMP snooping

LastMemberQueryInterval

Default: 200000

HostTimeout

Default: 3000000

MrouterTimeout

Default: 1

LeaveTimeout

Default: 0

4-37

SJ-20121120142951-001|2012-11-30 (R1.0)

ZTE Proprietary and Conﬁdential

Page 84 / 127

ZXHN H108N Maintenance Management Manual

Parameter

Description

MaxGroups

Default: 100

3.

Click

Apply

.

– End of Steps –

4.12.4 Configuring MLD

This procedure describes how to conﬁgure Multicast Listener Discovery (

MLD

).

Context

The settings in this page are optional.

Steps

1.

Select

Advanced > Network Tools > MLD Conﬁguration

.

The

MLD SETTINGS

page is displayed, see

Figure 4-35

.

Figure 4-35 MLD SETTINGS Page

2.

Conﬁgure the MLD parameters. For a description of the parameters, refer to

Table

4-22

.

Table 4-22 MLD Parameter Descriptions

Parameter

Description

Enable Mld Proxy

Whether to enable MLD proxy

WAN Connection

WAN connection

4-38

SJ-20121120142951-001|2012-11-30 (R1.0)

ZTE Proprietary and Conﬁdential

Page 85 / 127

Chapter 4 Advanced Conﬁguration

Parameter

Description

Enable Mld Snooping

Whether to enable multicast snooping

3.

Click

Apply

.

– End of Steps –

4.12.5 Configuring UPnP

This procedure describes how to conﬁgure Universal Plug and Play (

UPnP

).

Context

UPnP is a set of networking protocols that provides compatibility among networking

devices, software, and peripherals.

After UPnP is conﬁgured, a device can be dynamically added to a network to obtain an IP

address, announcing its functions and knowing the functions of the other devices.

Steps

1.

Select

Advanced > Network Tools > UPnP

. The

UPnP

page is displayed.

2.

Conﬁgure the UPnP parameters. For a description of the parameters, refer to

Table

4-23

.

Table 4-23 UPnP Parameter Descriptions

Parameter

Description

Enable UPnP

Whether to enable the UPnP function

WAN Connection

WAN-side interface

LAN Connection

LAN-side interface

3.

Click

Apply

.

– End of Steps –

4.12.6 Configuring the ADSL

This procedure describes how to conﬁgure the Asymmetric Digital Subscriber Line (

ADSL

)

settings of the ZXHN H108N.

Context

Before changing the ADSL mode, you need to disable Digital Subscriber Line (

DSL

).

Steps

1.

Select

Advanced > Network Tools > ADSL

. The

ADSL SETTINGS

page is displayed,

see

Figure 4-36

.

4-39

SJ-20121120142951-001|2012-11-30 (R1.0)

ZTE Proprietary and Conﬁdential

Rate

Popular ZTE Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share