19216811.liveZXHN H108L Wireless ADSL Router Maintenance Manual
22
Confidential and Proprietary Information of ZTE CORPORATION
Parameter
Description
Connection
Select whether your connection is always on or if it connects on
demand. If on demand specify how many minutes the connection
may be idle before it disconnects
TCP MSS Option
Enter the TCP MSS to be used
Get IP Address
Choose whether the ZXHN H108L obtains the IP address statically
or dynamically
Static IP Address
Enter the static IP address. Only if static IP is selected.
IP Subnet Mask
Enter the IP subnet mask. Only if static IP is selected.
Gateway
Enter the gateway address. Only if static IP is selected.
NAT
Select whether NAT is enabled or disabled
Default Route
Select whether this PVC will be the default route for the Internet
data
Dynamic Route
Select the RIP type and direction form the dropdown lists
Multicast
Select the multicast protocol to be used from the dropdown list
MAC Spoofing
Disabled in default, Select Enabled to set a fake MAC of modem
DHCP
IPv6
Enable
Select the
way of Modem to get IPv6 address
DHCP PD Enable
Usually select Enable, or modem can
’
t access internet
MLD Proxy
Select whether MLD Proxy is enabled or disabled
Dual Stack Lite
Select whether enable DS Lite
Note:
The parameters listed in Table 10
should be
provided by the ISP. The user name must be asigned by
the ISP.
Bridge Mode
Figure 11 shows the bridge mode parameters on the web
configuration page and Table 11 gives the parameter descriptions.