Page 31 / 89
Scroll up to view Page 26 - 30
Chapter 4 - Interface Setup
Confidential and Proprietary Information of ZTE CORPORATION
17
UBR: It is for connections that have variable traffic.
rtVBR: It is for connections that, while having variable traffic,
require precise timing between traffic source and destination. PCR,
SCR and MBS must all be set for rtVBR.
nrtVBR: It is for connections that have variable traffic, do not
require precise timing, but still require a set bandwidth availability.
PCR, SCR and MBS must all be set for nrtVBR.
The
PVCs Summary
button opens a new window that displays the
current PVC settings, as shown in Figure 7.
F
IGU RE
7
T
HE
PVC
S
UMM AR Y
T
AB L E
Encapsulation
Four ISP connection modes can be selected according to requirement.
Dynamic IP Address: Choose this option to obtain an IP address
automatically from the ISP.
Static IP Address: Choose this option to set static IP information
provided by the ISP.
PPPoE/PPPoA: Choose this option if the ISP uses PPPoE/PPPoA.
Bridge Mode: Ch
oose this option if the ISP uses bridge mode.
Page 32 / 89
ZXHN H108L Wireless ADSL Router Maintenance Manual
18
Confidential and Proprietary Information of ZTE CORPORATION
Dynamic IP address
Figure 8 shows the dynamic IP address parameters on the web
configuration page and
Error! Reference source not found.
gives
the descriptions of the parameters.
F
IGU RE
8
D
YN AM IC
IP
A
D D R ESS
P
AR AM ETER S
(IP
V
4)
T
ABL E
8
T
HE
D
ESC RIPTION S OF THE
D
YN AM IC
IP
A
D D RESS
P
AR AM ETERS
Parameter
Description
Encapsulation
Select the encapsulation type from the dropdown list
IP Unnumbered
Deactivated usually, select Activated to enable Bridge interface
NAT
Select whether NAT is enabled or disabled
Default Route
Select whether this PVC will be the default route for the Internet
data
Dynamic Route
Select the RIP type and direction from the dropdown lists
Multicast
Select the multicast protocol to be used from the dropdown list
DHCP
IPv6
Enable
Select the
way of Modem to get IPv6 address
DHCP PD Enable
Usually select Enable, or modem can
’
t access internet
Page 33 / 89
Chapter 4 - Interface Setup
Confidential and Proprietary Information of ZTE CORPORATION
19
Parameter
Description
MLD Proxy
Select whether MLD Proxy is enabled or disabled
Dual Stack Lite
Select whether enable DS Lite
Static IP Address
Figure 9 shows the static IP address parameters on the web
configuration page and Table 9 gives the parameter descriptions.
F
IGU RE
9
S
T ATIC
IP
A
D D RESS
P
AR AM ETER S
T
ABL E
9
T
HE
D
ESC RIPTION S OF THE
S
T ATIC
IP
A
D D RESS
P
AR AMETERS
Parameter
Description
Encapsulation
Select the encapsulation type from the dropdown list
Static IP Address
Enter the static IP address
IP Subnet Mask
Enter the IP subnet mask
Page 34 / 89
ZXHN H108L Wireless ADSL Router Maintenance Manual
20
Confidential and Proprietary Information of ZTE CORPORATION
Parameter
Description
Gateway
Enter the gateway address
NAT
Select whether NAT is enabled or disabled
Default Route
Select whether this PVC will be the default route for the Internet
data
Dynamic Route
Select the RIP type and direction form the dropdown lists
Multicast
Select the multicast protocol to be used from the dropdown list
IPv6 Address
Enter the static IP address
IPv6
Default
Gateway
Enter the gateway address
IPv6 DNS Server
Enter the IPv6 DNS address
MLD Proxy
Select whether MLD Proxy is enabled or disabled
Note:
The parameters listed in Table 9 should be provided
by the ISP.
PPPoE/PPPoA
Figure 10 shows the PPPoE/PPPA parameters on the web
configuration page and Table 10 gives the parameter descriptions.
Page 35 / 89
Chapter 4 - Interface Setup
Confidential and Proprietary Information of ZTE CORPORATION
21
F
IGU RE
10
PPP
O
A/PPP
O
E
P
AR AM ETER S
T
ABL E
10
T
HE
D
ESCR IPTION S OF THE
PPP
O
E/PPP
O
A
P
AR AM ETER S
Parameter
Description
Servicename
Enter the Servicename
Username
Enter the username
Password
Enter the password
Encapsulation
Select the encapsulation type from the dropdown list
19216811.live