Page 26 / 63
Scroll up to view Page 21 - 25
Page
19
The
Administrator Setting
page provides the following configuration options:
a.
Change Administrator’s User Name and Password
b.
WAN Side Administration
Change Administrator’s User Name and Password.
You can specify a new user name and password for the administrator. After enter the new user name,
old password and new password twice, then click the “
Apply
” button to make the new user name
and password effective. And The “user name and password” screen will appear. Enter the new user
name and password to obtain authentication.
WAN Side Administration
You can configure the ZSR0104C SERIES to be managed from the WAN side, Internet, via
web browser with specified port number. Click the check mark of the “
Allow
administration from WAN side with port
” to enable the remote access the NAT router.
You can change the HTTP server default port number, 80, to any number in the range 1 to
65535 if it is desired or the port 80 of a virtual server is enabled.
For example, the port
number 80 is specified in the following case.
Click the “
Apply
” button to make the remote access effective.
Downloaded from
www.Manualslib.com
manuals search engine
Page 27 / 63
Page
20
5.5 Firmware Upgrade
A web-based interface, via Microsoft Internet Explore or Netscape web browser, is provided to
allow the user upgrade the latest firmware to the
NAT Router. The firmware upgrade could be
executed from LAN site (local upgrade) or from WAN site (remote upgrade)
Pre-requirements
•
A copy of the latest firmware of NAT router
•
A computer (Window-based, Unix-based or Mac-based) runs the web browser either
Internet Explore or Netscape and holds the latest firmware of the NAT router
•
The network connection from the computer to the NAT router, which is targeted for the
firmware upgrade. To make a local network connection, user can plug one end of Ethernet
cable into the computer’s Ethernet port and the other end of cable to the NAT router’s one of
four LAN ports.
Step 1. Click the “
Upgrade”
button at the side bar, the Firmware Upgrade pages appears.
Step 2. Enter the latest firmware name and including the path into firmware file name field or click
the
Browse
icon.
If the
Browse
icon was clicked, the “Choose file” screen will appear.
Downloaded from
www.Manualslib.com
manuals search engine
Page 28 / 63
Page
21
Through the “Choose file” menu, locate the latest router firmware and open it. For example, the
latest firmware file, zonet_2004.bin, is located and opened, the file name will appear at the entry
of the firmware file name.
Step 3. Click the “
Apply
” icon from the firmware upgrade page
After clicking the “
Apply
” button, will appear the confirmation page.
Downloaded from
www.Manualslib.com
manuals search engine
Page 29 / 63
Page
22
If click the “
OK
”, will appear firmware upgrade programming page, please wait for 35 seconds,
the Nat will restart.
When the firmware update is in process, please do not plug out the power adapter of
ZSR0104C SERIES. The sudden disconnection of power supply may damage the flash
hardware and cause the malfunction of ZSR0104C SERIES.
5.6 Reset
You can set the ZSR0104C SERIES back to its manufacturing setting and reset the ZSR0104C
SERIES by clicking the
Reset
button. If click the
Reload
button, the confirmation page appears on
the screen. Click the
OK
button on the confirmation page to make the default settings effective (see
Figure 5 – 5). If click the Reset button, the confirmation page appears on the screen. Click the
OK
Downloaded from
www.Manualslib.com
manuals search engine
Page 30 / 63
Page
23
button on the confirmation page to make the ZSR0104C SERIES reboot. (See Figure 5 - 6)
Figure 5 – 5
Figure 5 – 6
After clicking the OK button, Please remember: use
192.168.1.1 to access web page after reboot”.
5.7 Dynamic DNS (Domain Name System)
If ZSR0104C SERIES acquired its WAN IP address via the DHCP or PPPoE schemes, its IP address
is likely different from previous one after ZSR0104C SERIES is rebooted or PPPoE session is
re-established. It makes difficult or even broken for some applications due to dynamic nature of
ZSR0104C SERIES WAN IP address. The “
Dynamic DNS
” feature provides a solution to this
problem by automatically updating its WAN IP address to a DDNS service provider.
Many Internet Service Providers provide a kind of service called
Dynamic DNS
service, which
allows you register a fixed domain name. Every time when ZSR0104C SERIES gets a new dynamic
public IP address, it informs the DDNS service provider with this new IP address; then any
connections toward to your domain name will be mapped to the updated IP address.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live