Page 76 / 145 Scroll up to view Page 71 - 75
65xx-A1 Family Router Users Guide
76
2.
Click
Tone Selection
.
The frequency band of ADSL is split up into 256 separate tones, each spaced 4.3125 kHz
apart. With each tone carrying separate data, the technique operates as if 256 separate
modems were running in parallel. The tone range is from 0 to 31 for upstream and from 32 to
255 for downstream. Do not change these settings unless directed by your ISP.
Page 77 / 145
65xx-A1 Family Router Users Guide
77
UPnP
Universal Plug and Play (UPnP) is used to connect devices such as game consoles or printers
that are on the same subnet.
Game consoles such as xBox or PS3 which requires network
connections can use UPnP to be connected to the Internet.
DNS Proxy
By default the router has a Domain Name Service (DNS) running. All DNS resolution is performed
by the router.
Page 78 / 145
65xx-A1 Family Router Users Guide
78
1.
In the
Host name of the Broadband Router
text box enter the Host Name for the DNS
Server to be used.
2.
In the
Domain name of the LAN network
text box enter the domain name of the local
network.
3.
Click
Save / Apply
.
Print Server (6519 ONLY)
Enable or disable a printer server on the router. This requires that you plug in a USB drive into
the USB port on the router.
Adding a printer server
This section explains how to add a printer server the router for Windows 7 and Windows XP. For
other operating systems, refer the documentation for your device. When adding a printer server
for the router, use the following syntax:
http://
<modem_IP_Address>
:
<Port ID>
/printers/
<Printer_Name>
Where
<modem_IP_Address> is the Modem LAN IP Address, the default IP Address is 192.168.1.1
<Port_ID>: fixed at 631
<Printer_Name> must be the same name entered in the modem
Printer Server Setting
screen.
Page 79 / 145
65xx-A1 Family Router Users Guide
79
Windows 7
1.
In the
Advanced Setup
>
Print Setup
screen, add the printer. In this example, the printer
name is CanonMP250.
Page 80 / 145
65xx-A1 Family Router Users Guide
80
The following example uses a router IP Address as 192.168.1.254, as shown in the
LAN Setup
page.
Normally, the router default IP address is 192.168.1.1.
2.
From the
Control Panel
,
Hardware and Sound
>
Devices and Printers
screen click
Add a
Printer
.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top